The transmission won't downshift when you press hard on the accellerator.
Answerlow or no trans flud. bad torque converter causing the trans to slipcheck the kick down cable,also known as the detent cable.. that will also change the shift patterns to eather shift too soon or too late...
Broken or worn control cable? Bad throttle body?
Typically it mean that you shouldn't make a bad situation worse.
There is a bad ground cable.
More than likely you have a hyd. clutch and either the slave cylinder Mounted down at the transmission is bad or the master cylinder up in the motor compartment is bad. if it is cable operated you cable may be bad. there are other things that can happen but check this first.
If the ohms are infinite or greater than one megohm you can conclude the cable is bad. Usually if the ohms are greater than 3 ohms the cable is bad. If the cable is less than 3 ohms it depends on what the cable is used for and how long it is.
Because they are bad moms?
hbshbhbvhbyvhvghfguhfb
Yes! a coaxial cable can go bad. Yes! you can suddenly lose the signal from an atenna because of a bad cable. A a new coaxial cable may fix the problem as long as the damaged cable is the source of the problem. However if the signal problem is at the tap or one of the splitters in your home you will need to call your cable company to fix the problem.
Its funny third world debt is bad because it affects use as it cuts down are money which is hard for use to get the stuff we need x
Paronia
because our country will not have Lot to work with