A flank in thread refers to the angled surfaces of the thread that connect the crest (the highest point) and the root (the lowest point) of the thread profile. It plays a crucial role in determining the thread's strength and its ability to engage with a corresponding nut or hole. The flank angle affects how the load is distributed along the thread, influencing both performance and wear over time. Proper flank design is essential for ensuring effective fastening and minimizing the risk of stripping or failure.
The 3 main parts of a Screw thread are :- Root ....... (bottom) Flank ....... (sides) Crest ........(top)
This is a tool that is used to measure the pitch diameter of a screw. This tool looks like a standard micrometer except that the anvils are specially configured to reach into the screw thread groove and touch the pitch diameter of the screw thread. The screw thread micrometer does not measure any other aspect of the screw thread. It does not measure the: pitch; threads-per-inch; major diameter; minor diameter; flank angles; lead; helix angle.
Buttress threads and TCPC (Trapezoidal Controlled Pitch) threads are not interchangeable due to differences in their profiles and thread geometry. Buttress threads have a flat flank on one side and a sloped flank on the other, designed to handle axial loads efficiently, while TCPC threads feature a trapezoidal shape optimized for specific applications like lead screws. Using one type in place of the other can lead to improper fit, reduced strength, and potential failure in mechanical applications. Always consult specifications to ensure compatibility.
The flank of beef produces the following steaks: # Flank Steak # Flank Steak Rolls Flank steak is considered London Broil when it is marinated whole.
The 'flank' is the side of the body.
The "flank" when referred to in these terms means the side or sides. Therefore you would be instructed to protect the left or right flank (side) or to protect the flank (both side)
Use ICD code 789.09 for flank pain because flank is a part of the abdomen.
Other words for flank are lateral or side.
This is a tool that is used to measure the pitch diameter of a screw. This tool looks like a standard micrometer except that the anvils are specially configured to reach into the screw thread groove and touch the pitch diameter of the screw thread. The screw thread micrometer does not measure any other aspect of the screw thread. It does not measure the: pitch; threads-per-inch; major diameter; minor diameter; flank angles; lead; helix angle.
It would be what you call the NEARSIDE
The butcher, cut off the left flank for a stew
There are many sites online that have incorrect information on what part of the animal is the flank. In reality the flank of an animal is, generally, the side of the animal.