0
(First you need some way to put lots of compressed air into the bottle. If you're doing this) well where is the rest of the answer then? what you need to do then is make a proper flight panning system by choosing the design of the rocket you are going to propel. like say put cardboard wings on the side and a paper cone on the tip of the soda bottle, also dont forget you also need to put water in the bottle to launch it properly. then from there you must do a stability text by putting a piece of string and Duct Tape it to the middle of the bottle to make sure it is balanced if it is not tipping to one side and balanced, then you are ready for the next step, then you spin it around over your head as if you are using a lasso, then from there if it goes in a straight circle and does not move around from side to side you have a stable bottle rocket ready to launch!
Note: There are comments associated with this question. See the Discuss:How_to_make_a_soda_bottle_rocketto add to the conversation.
What he said.
Read more: How_to_make_a_soda_bottle_rocket
What else can I help you with?
What is the best way to design a bottle rocket that will travel the highest altitude?
make it hold as much pressure as possible and experiment with the amount of fluid/air.
Would having more fins on a bottle rocket be better?
Fins are used to help keep a rocket stable. The only way to find out if more fins will make it more stable is by testing it.
How do you build a rocket?
You can build a rocket in various ways... One way that you ca build a rocket is using bottles...A bottle rocket.use a straw and some stiks and some paper
what is the best way to get to space?
space rocket is the Ancer
How do you put a parachute on a bottle rocket?
The best method is to tape the parachute to the side of the bottle and stuff it inside of the nose cone. The nose cone should have string connecting it to the rocket, yet, the nose cone is not actually taped to the bottle. It should balance on: a) Tabs (Cardboard) b) Just have it firmly on top of the top of the bottle This way, the rocket will soar straight up (hopefully), the nose cone will detach (but stay connected), the parachute will fill up with air and expand, and your successful rocket will sink to the ground at about 2-6 mph.
What is the best way to make a fake rocket?
well first you fill a cut or canister with water but only a third of the way the you add a tablet or vinegar and baking power then enjoy your rocket. P.S please do this outside and you can decorate with paper if you want to
What is the best way to shoot off a 2 liter bottle rocket by pressure air?
To shoot off a 2-liter bottle rocket using air pressure, first, fill the bottle about one-third full with water and ensure the cap is securely attached. Use a bicycle pump to pressurize the air inside the bottle through a valve or a cork that can be easily removed. Once sufficient pressure is built up (around 40-60 psi is suitable), quickly release the cork or valve to launch the rocket. Always conduct this activity outdoors and follow safety precautions.
Explain how a rocket works?
A bottle rocket is like a firecracker on a stick. The bottle rocket is placed at an angle in a soda bottle that is firmly on the ground. Then the bottle rocket's fuse is lit. When the fuse burns down there is an abrupt explosion in the bottom of the rocket that forces it to fly up. When it burns all the way up the bottle rocket, gun powder in the tip of the rocket explodes in the air.
How does a rocket provide power?
action & reaction. The burning of rocket fuel produces gases that move fast and make the rocket move the opposite way
Should a pop bottle rocket have a cone?
When designing a pop bottle rocket, your objectives are to minimize weight and drag. Think of the pressure in the bottle as a fixed ammount of energy that will be turned into velocity of the rocket per Energy = 1/2 * Mass * Velocity^2. As your rocket flies up into the sky, two things will happen to that energy. First, the energy will change into potential energy per Energy = Height * Mass * Gravity. (Gravity = the rate of acceleration due to gravity = 9.8 meters / second^s.) Second, the energy will be lost to friction. As your rocket flies through the air, it will bump trillions of trillions of air molecules and give its kinetic energy to them. To minimize this bumping, you want to make it easy for the rocket to push the air molecules out of the way. This would be best accomplished by a long, slowly tapering nose-cone. Keep in mind that the heavier your nose cone, the less velocity you get.
What is the best way to store and dispense alcohol in a mixer bottle?
The best way to store and dispense alcohol in a mixer bottle is to keep the bottle tightly sealed when not in use to prevent evaporation and contamination. When dispensing, pour the alcohol slowly to avoid spills and measure accurately for consistent mixing.
What is the best way to take out supercharger oil in a 1999 Bonneville?
I wish there was a simple way, but the best way is to get a baster or a douche bottle to suck it out. I used a regular spray bottle to get mine out and it worked great, fast and easy. I removed the top from the bottle, cleaned the tube connected to the sprayer, insert the tube into the supercharger and sprayed the dirty oil into the bottle. This was on a '95 model. The superchargers are different but this still should work on a '99.
