Primer for the 1st coat. Have it tinted with color you plan to paint to make application of paint go faster. You may get away with only painting one coat if lucky!
There are flat paints that are made to go over semigloss paint. Many inexpensive flat paints will peel almost immediately when laid over semigloss. The most common solution is to roughen the surface of the semigloss (sandpaper, sandblasting, steel wool, or trisodium phosphate). The actual requirement is to remove alkyds which migrate to the surface of some semigloss and gloss paints. The alkyds make it impossible for latex or acrylic to bond to the surface underneath. You also have to remove buildup of dirt, mildew, etc. Most primers are suitable for recoating semigloss. Read the label. A layer of primer followed by your flat paint is generally the best solution if the surface is relatively clean. Benjamin Moore Fresh Start interior / exterior acrylic primer is one example of a good primer for this application.
I would recommed satin or eggshell. Satin and eggshell paint or both easy to wipe/clean and better to withstand multiple cleanings.
Satin paint is generally better for cement patios compared to flat paint. Satin finishes offer more durability, making them better suited to withstand outdoor elements and foot traffic. Additionally, satin paint is easier to clean and resists stains more effectively than flat paint, which can absorb moisture and dirt. Ultimately, for a patio, satin is preferable for both aesthetics and longevity.
You typically do not need primer when painting satin paint over existing satin paint, provided the surface is clean, in good condition, and the colors are similar. However, if the existing paint is in poor condition or if you're making a significant color change, using a primer can help ensure better adhesion and coverage. Always clean the surface before painting to achieve the best results.
Water based paint with a satin finish. This paint type looks the best on interior walls, in my opinion. The water based paint makes for easy clean up as well.
The best paint for interior stairs is a durable, high-quality acrylic or latex paint that is specifically designed for high-traffic areas. Look for a paint that is stain-resistant, easy to clean, and has a semi-gloss or satin finish for added durability.
Use a Exterior Latex Satin paint......You can spray on or use a zip roller low nap! You will need a brush to cut in where roller cant get.
I used a White since it goes with everything
Many would say that a semi-gloss, flat or satin finish would be best for a houses exterior. The semi-gloss is suppose to be the easiest to clean later on. The flat or satin finish paints, do not have reflective shine when dry.
the best paint is flat white paint with a drop of violet in it. the white will make the closet brighter and the drop of violet pigment will enhance the brightness of the white. Your local hardware store will be happy to do this for you.
You can use latex or acrylic paint over oil-based paint. Make sure to properly prepare the surface before applying the new paint for best results.
Generally, a satin or semi-gloss sheen is best for decorative trim. The shinier paint will be a bit easier to apply, be smoother after application and will accent the crown molding. I always paint crown, doors, door trim, and baseboards in high gloss. Here in the south we also use only one color, white. I also use ceiling paint as the primer coat because I paint it (the crown moulding) when I paint the ceiling. Then I apply 1 coat of high gloss on the crown. Then I paint the last coat that has been thinned a little with water (2 tablespoons per cup of paint) This goes on very fast and smoothe and when finished looks like wet vanilla ice cream. When you paint high gloss, be advised that you have to keep a wet leading edge, meaning that if you stop painting and the paint is allowed to dry, it will show where you stopped and then restarted. The same is true for semi gloss and satin.