The needle position knob is a feature commonly found on sewing machines that allows the user to adjust the position of the needle, either to the left or right. This adjustment is useful for various sewing techniques, such as topstitching, sewing zippers, or creating decorative stitches. By changing the needle's position, users can enhance precision and achieve better results in their sewing projects.
The door knob may be stuck in a locked position due to a malfunction in the locking mechanism, a misalignment of the door and frame, or a broken internal component of the knob itself.
The stitch width knob is usually located on the front of a sewing machine to determine the side-to-side motion of the needle as it stitches.
You probably need to adjust the tension knob.
The Brother "Project Runway" does have a needle-change position function.
36 inches from the floor
The knob that moves the slide on the stage left and right is called the mechanical stage control knob or the x-axis translation knob. By turning this knob, you can adjust the position of the slide while viewing it under the microscope.
Make sure gas is on and shut offs are open Turn gas valve to PILOT position Push knob down and light pilot HOLD knob down for aprox. 30sec-1min Slowly release knob Pilot should stay light (if not troubleshoot) Turn know to ON position Adjust thermostat to desired position
u take a pair of needle nose pliers and at the front of the knob near the bottom there is a pin that loks almost like a staple just pull it out and it will come off
The stage adjustment knob is used to move the stage horizontally or vertically to position the specimen under the objective lens for viewing. It helps in focusing the specimen and adjusting its position on the microscope slide.
what is the meanig of domestic accident? what is the meanig of domestic accident?
I HAVE A JONES VX890 SEWING MACHINE. CAN YOU TELL ME WHA SETTING THE TENSION KNOB ABOVE THE NEEDLE SHOULD BE AT AND WHAT NUMBER THE KNOB ON THE RIGHT SHOULD BE. I ONLY WANT TO DO STRAIGHT STITCHING NO FANCIES.
To properly ignite the pilot light on a gas fireplace, locate the control knob and turn it to the "pilot" position. Press and hold the knob while using a long lighter to ignite the pilot light. Keep holding the knob for about 30 seconds to allow the pilot light to stay lit. Release the knob and turn it to the "on" position to start the fireplace.