0
What else can I help you with?
How do you swap a front sprocket off a 1997 explorer?
it is a 300 polaris explorer
How do you change oil on polaris 300 4x4 xplorer?
how much oil to put in polaris 300 explorer 4*4 98
Where is the starter on a 1997 polaris explorer 300?
On the very bottom between primary & secondary.
What is the year of polaris 300 explorer VIN number W969130?
The Polaris 300 Explorer with VIN number W969130 was manufactured in 1996. The first character of the VIN, "W," indicates that it was produced in the United States, and the following characters help identify the specific model and year.
How much transmission fluid does a 1996 Polaris explorer 300 4X4 ATV take?
4 ml
How do you get to the starter on a Polaris xPlorer?
To remove the started on a Polaris 300 Explorer ATV first open the hood. Locate the started which will be up against the wall near the driver's side and remove the screws. You can now install a new started.
What is the oil mixture for a 1995 Polaris 300 sportsman?
Idon't know about a 1995 Polaris 300 Sportsman, but I have a 2008 Polaris 300 Sportsman and the main particular oil I use for mine is Polaris brand oil. If your not satisfied with my answer, call your Polaris Company.
How do you tighten chain on polaris 300 xpress?
To tighten the chain on a Polaris 300 Xpress, first, ensure the ATV is on a level surface and securely supported. Locate the rear axle adjusters, which are typically found on both sides of the swingarm. Loosen the axle nut and turn the adjusters clockwise to tighten the chain, ensuring it has about 1-1.5 inches of slack. Finally, re-tighten the axle nut and double-check the chain tension before riding.
What size of NGK spark plugs does a 1991 polaris 300 snowmobile use?
go to ngk.com type your model in and they will tell you
What type of oil do i use for a polaris hawkeye 300?
300
How do you remove the starter on a 1996 polaris explorer 300 4x4 ATV?
To remove the starter from a 1996 Polaris Explorer 300 4x4 ATV, first ensure the ignition is off and disconnect the battery to prevent any electrical issues. Remove the starter cover and disconnect the electrical connections from the starter. Then, unbolt the starter from its mounting brackets, making sure to keep track of the hardware. Finally, carefully pull the starter out from its housing.
Where do the hoses go on 1995 polaris 300 explorer carburetor go?
There are three hoses on a Polaris 300 carburetor. The fuel line is the large one. One is a vent hose that goes nowhere, and the oil injector line connects to the small hose connector on the right side, nearest to the air intake. It goes straight out.
