answersLogoWhite

0

If they are for electrical use, smaller then 16ga., I would solder them together and either tape them or put shrink wrap over them. If for crafts you can twist, braid, and even solder them also, if the wire is flexible enough you can even use knots. Good-Luck

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the best was to connect two 100um diameter wires in a linear fashion so that I can pull one wire using the other wire through a small guide?

Shouldn't take much heat to weld wires that small.


What is the best way to connect the black and red wires when setting up a new electrical circuit?

The best way to connect the black and red wires when setting up a new electrical circuit is to use wire nuts or terminal blocks to securely join the wires together. It is important to ensure that the connections are tight and properly insulated to prevent any electrical hazards.


Whats the best footwear when riding a horse?

shoes with a small heel riding boots or jodphur boots are best


What is the best way to connect a small propane tank to a device using a small propane tank adapter?

The best way to connect a small propane tank to a device using a small propane tank adapter is to ensure that both the tank and the device are compatible with the adapter, securely attach the adapter to the tank, and then connect the device to the adapter following the manufacturer's instructions. It is important to check for any leaks before using the device.


Whats the best way to fix a small crack on pool steps on an inground pool that it should stay sealed?

Cement!


When installing a new radio in a 1994 Toyota Tercel how do you distinguish which wires are what concerning the radio?

Usually the aftermarket radio you put in needs a wiring harness you can buy at most audio stores and big electronic stores like Best Buy. The back of the package will tell you which wires connect by color. Remember, solder is the best tool for connecting wires but usually permanent.


What are the best installation tips for a small fluorescent light fixture?

To install a small fluorescent light fixture, follow these tips: Turn off the power to the area where you will be installing the fixture. Remove the old fixture, if applicable, and disconnect the wires. Mount the new fixture to the ceiling or wall using the provided hardware. Connect the wires from the fixture to the corresponding wires in the electrical box, following the manufacturer's instructions. Secure the fixture in place and test it to ensure it is working properly. Turn the power back on and enjoy your newly installed fluorescent light fixture.


What do colors mean on 02 Sensor need to connect universal 02 sensor and don't know which colors to match you need to connect Universal 02 sensor to Toyota wiring?

the black wires are for the heater circuit, the blue and white are the sensor wires. the universal sensor probably wont work though, its best to bite the bullet and get the correct one from toyota.


How do I setup a large home theater?

You need a series of wires and a television capable of surround sound. You can purchase a box that has outputs for forward/rear/side speakers that you connect wires to the speakers for. Sony is your best option--inexpensive and durable. I have the 6 speaker subwoofer surround.


Whats the best instrument?

Piano


What is the color order for the wires that connect to main relay through the Gray connector on 1993 Acura Legend L?

http://www.arnach.net/service/index.php It's not the best, but I have found alot of information from it.


Whats the best aftershave?

Lynx is the smelliest but I recommend as the best!