There could be anywhere from 2 to 6 depending on the model of the mower.
Belt diagram for brings&straton noma 46" deck
917.249740 is not the mower's model number. It is the model # for your grass catcher assembly.
what size is the belt for a 46 in cut deck belt with 6 pulley's.
To put on the belt on a Husqvarna YTH 180 with a 46-inch deck, first, ensure the mower is turned off and the key is removed. Raise the deck to its highest position and remove the deck from the mower by detaching the pins or brackets. Then, remove the old belt from the pulleys and replace it with the new belt, ensuring it follows the correct routing as indicated in the owner's manual. Finally, reattach the deck to the mower and lower it back to the desired cutting height.
Its all spring loaded. No adjustments needed.
Check out http://www.managemyhome.com; they have manuals for almost all appliances and other things you need around the house. I found the manual for my Craftsman mower here. Good luck.
The diagram should be on a label on the deck or on the rear of the mower. If it is gone, then your local mower repair shop can probably print you one out for a small fee.
Without knowing the exact mower you are working on, I will give you the most common answer. If the blades are belt driven you do not have to align them. They are positioned so that they will not contact each other and will overlap in their cut pattern.
For a 46-inch ACE mower, you can typically find diagrams in the owner's manual or online resources specific to your mower model. The deck belt generally loops around the engine pulley, the deck pulleys, and the idler pulley. If you don't have the manual, a quick search for your mower model's belt routing diagram can yield helpful images. Additionally, many lawn care forums and YouTube videos provide step-by-step visual guides for this process.
The attachments for a John Deere 240 tractor are a 38" mower deck, 46" mower deck, blade and a 42" snow blower. You can find a complete listing of these attachments here: http://www.tractordata.com/lawn-tractors/000/0/2/26-john-deere-240-attachments.html
Hi, Chute or lower half of chute will have to be changed(depends on one or two piece chute on machine.) Rest will bolt up - frame the same. Peace, crigby
Ranch King is a brand name of the manufacturer MTD. Product manuals with part blow-up diagrams are available from MTD's web site, http://www.mtdproducts.com/ Models are identified from the model number printed on a label under the mower seat. Parts can be ordered directly from MTD or other distributors on the web. It is my experience that original brand name MTD belts work best. The 22HP, 46" mower deck Ranch King Pro has 3 belts: The drive belt which runs from the engine pulley back to the hydro drive unit to provide over-the-ground propulsion is part #754-0349. A mower has either an electric PTO or a manual PTO, not both. The electric PTO belt the provides power to the blade deck (runs around the electric clutch on the engine shaft (activated by electric switch, not the mechanical hand lever that engages the mower deck) is p/n 754-0476 for the 46" deck. The manual PTO belt the provides power to the blade deck (runs off the pulley on the engine shaft (activated the mechanical hand lever to the left of the steering wheel that engages the mower deck) is p/n 754-0228 for the 46" deck. The deck belt that goes around the 3 blade spindle assemblies on the mower deck, to drive the grass cutting blades is p/n 754-0349 In my experience, the PTO belt lasts about half a season, the other belts break about every other season when mowing 4 acres weekly.