Sherwin Williams
You can stain T 111 siding with an oil or water based solid stain. You can also use a semi-transparent stain, however, it may have a blotchy or nonuniform appearance.
You re-stain with a darker stain. Good luck.
Wet cloth.
Yes, you can stain cedar siding trim from a dark stain to a lighter stain, but it may require more effort. First, you'll need to thoroughly strip the existing dark stain using a wood stripper or sander to remove as much of the old finish as possible. Afterward, you can apply the lighter stain. Keep in mind that achieving the desired color may take multiple coats, and testing on a small, inconspicuous area is recommended.
It can leave a stain, which caught soon enough can be removed easily, usually by using a pet stain remover, being careful that a particular cleaner will not damage the material you're cleaning by checking the label. Dog Urine can also increase the fading of some types of siding, and in a case where this happens, the questionable area will need to be repaired by new siding.
There are three factors affecting the overall cost of the siding product you select: the cost of materials, labor and paint or stain being applied. Of particular interest is comparing the total in-place, system price (including paint or stain) to other cladding systems. Fiber cement costs about 75% less than natural stone, 37% less than cedar, 24% less than wood siding and slightly more than hardboard siding to install and finish on a new home.
When choosing a siding stain, consider the type of wood and desired color. Opt for a high-quality stain with UV protection to enhance appearance and protect against weathering. Before applying, clean and prep the surface thoroughly. Apply the stain evenly with a brush or sprayer, following the manufacturer's instructions. Allow proper drying time between coats for best results.
Many things can cause iron stains on the vinyl siding of a home. The best way to remove these stains is to use tub and tile cleaner and a cloth scouring pad.
It depends on how porous the siding material is. If it is fairly new, rubbing alcohol may remove it. If it is older paint that has weathered, it may be pretty hard to remove and you may have to paint over it.
To remove stains left on vinyl siding from Goof Off, start by diluting the cleaner with water, using a ratio of one part Goof Off to three parts water. Test the solution on a small, inconspicuous area first to ensure it doesn't damage the siding. Use a soft cloth or sponge to gently scrub the stained area, rinsing thoroughly with water afterward to remove any residue. If the stain persists, repeat the process as needed or consider using a vinyl siding cleaner specifically designed for this purpose.
There are many options when it comes to siding your house. You can go with wood clapboard siding, which you can choose to either stain, paint or leave bare. Cedar shingle siding is a type of wood siding that's popular in New England. You can go with stucco siding if you want to add a dash of old-world elegance to your home. You can choose vinyl siding if you want an affordable, low-maintenance option. Aluminum is also a choice for people who want a clean, contemporary appearance. Finally, fiber cement siding is a useful wood substitute, as it looks like wood but is far more durable when it comes to keeping out bugs, fire and mold. Choose the house siding options that best suit you!
You should stain a new deck after it has been built and allowed to weather for at least 3-6 months. This allows the wood to dry out and be ready to absorb the stain properly.