For proper curing
75mm is the maximum clear cover of concrete
No. Concrete is made up mostly of aggregate.
To build a patio cover on existing concrete, you can use anchor bolts to secure the cover to the concrete. First, measure and mark the placement of the cover on the concrete. Then, drill holes for the anchor bolts and attach the cover frame to the concrete using the bolts. Finally, install the roofing material to complete the patio cover.
Most people would agree that plastic will degrade slower than concrete.
To create concrete molds using plastic materials, you can use plastic containers or sheets to shape the mold. Simply cut the plastic to the desired shape and size, then secure the pieces together using tape or glue. Make sure the plastic is sturdy enough to hold the concrete. Pour the concrete into the mold and allow it to set before removing the plastic to reveal the concrete shape.
POUR THE CONCRETE OVER THE BRICK
Yeah...the cardboard cover was made of cardboard and the plastic one was err.....plastic?
coverd with good plastic.
LG does manufacture a hard plastic cover for the LG Xenon. Aside from hard plastic cover, LG also offers a soft silicon cover, a paper cover and a titanium cover.
The easiest way to get melted plastic off of concrete is using a heat gun. You can heat it and them absorb with a porous scrap cloth.
Yes, it is possible to coat a composite plastic with concrete for added strength and durability. The surface of the plastic would need to be properly prepared to ensure good adhesion, and a suitable concrete mix would need to be applied and cured according to the manufacturer's guidelines to achieve a strong bond.
Under a plastic cover under the hood on the driver side.Under a plastic cover under the hood on the driver side.