0
[IMG]http://img.Photobucket.com/albums/v674/daveburwash/torquesettingscomplete.jpg[/IMG]
What else can I help you with?
What torque settings are needed for a Rover 111 cylinder head?
stage1. 20Nm stage2. +180 degrees stage3. +180 degrees.
Why is a transmission system needed?
In a car, a transmission system is needed because the engine does not make enough torque to make the car move.
What is the torque specs on rocker arms for 1997 grand am 3.1 engine they are bolt type not nuts Also must the engine be at top dead center to torque them?
According to alldata 13-15 ft lbs of torque are needed for the rocker arms. The engine does not need to be at TDC and it also does not have to be running.
What does a dynamometer measures?
A dynamometer is used to measure force, torque or power of a engine. A dynamometer also can measure the torque and power needed to power a given driven machine.
How do you change the heads on Chevrolet 350 engine is there a certain torque needed?
Most definitely they must be torqued correctly. Torque in a cris-cross pattern slowly reaching the torque setting. For all specs click the link.
How do you match a transmission system with an engine?
The relationship: Torque produced and required Required road speed Continuous load requirement (Torque and RPM) "power band" of the engine (will be used to determine the number of gears needed) Minimum and maximum input RPM
How many HP is 190cc engine with a 8.75 torque?
To estimate the horsepower (HP) of a 190cc engine with 8.75 ft-lb of torque, you can use the formula: HP = (Torque x RPM) / 5252. However, the RPM value is needed for an accurate calculation. Generally, small engines like this might produce around 6-8 HP, but the exact HP would depend on the engine's RPM at which the torque is measured.
Is the torque sensor really needed?
if it was not needed it would not be there in the first place.
What is the torque sequence for a Lexus ls400?
torque sequence on what part? more info needed
How do you correctly tension belts and chains?
One has to tension belts and chains according to what torque is needed on an engine. The tension varies upon each engine. If one needs this done one should look into a mechanic.
How much transmission fluid dexron 111 is needed for a 3.8 engine size of 1988 Buick Lesabre?
With the torque converter about 11 quarts. without about 7 quarts.
What is needed to repair a head gasket leak on a 1993 Ford Escort 1.8 liter engine with 225000 miles Thanks for your input. Paul?
The cylinder head has to be removed and the head gasket replaced. This is not an easy job for the do it your selfer. There are several special tools required and when the engine is apart, there are several areas that have to be checked for exact tolerances and torque settings, otherwise the new head gasket will blow. I would suggest you have a mechanic do the work.
