answersLogoWhite

0

Check to see if the P is lit on the insrument panel PRNDL indicator if not it is the selector switch on the side of the shifter Also check if you have brake lights if not it is the brake light switch

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Can you manually move the belt in a automatic seat belt on a 1993 mercury villager?

Not if the servo motor is seized. It will have to be replaced.


What automatic transmission is in a 2005 Ford F-150?

1995 F-150 6cyl. E4OD PCM has been changed by prior owner While driving it home noted what he was talking about that the only way was manually shift the transmission D,2nd,Low up and down as required to get it home.


Why dont the automatic trans not start off in low when in drive have to manually put the gear shift in low to start off?

This problem could be the linkage in the transmission. The transmission could also be going out and would need replaced.


How do you charge the air shocks in a 1993 Chrysler New Yorker?

You don't if you have automatic stablizing. It's done automatically with the compressor located behind the rear passenger tire. If it isn't doing what it is supposed to, then it needs to be repaired or replaced. You can charge them manually, but it will not last.


How do you adjust the rear shoes after they have been replaced?

The year, make and model would help but in most cases you can manually move the adjuster before you slide the drum on. Do this until the drum fits snug but not tight. The automatic adjusters will finish the adjustment as you drive.


Is there a way that you can get your automatic transmission completally replaced with a manual transmission?

Yes.


Where is the fuel reset switch for 99 Camry-Can't afford the manual?

There is no fuel reset switch on a 1999 Camry that can be operated manually. There is an automatic reset switch located near the fuel pump. This is a relay switch. If the fuel pump is shut off, the relay switch might need to be replaced.


How does an automatic fuse work?

An automatic fuse, often referred to as a circuit breaker, protects electrical circuits by interrupting the flow of current when it detects an overload or short circuit. It contains a sensing mechanism that monitors the current level; if it exceeds a predetermined threshold, the breaker trips, opening the circuit and stopping the flow of electricity. Unlike traditional fuses, which need to be replaced after blowing, automatic fuses can be reset manually once the fault is cleared, providing a convenient and reusable safety solution.


How has trains changed since 1867?

they are cool Many trains no longer use 'slam doors' (doors that you manually open) - they use automatic electronic doors instead. More modern trains can travel at higher speeds and all the steam locomotive trains have now been replaced by diesel trains.


Recently had your alternator and battery replaced on 1998 Chevy Malibu now the automatic daytime lights don't work you have to turn on lights manually what happened?

i'd say someone messed up ur wiring a little or u blew the fuse check the fuse first then question the first part after


Serpentine belt tightening 2001 mustang 3.8l?

Its automatic until needing replaced


How do you manually raise power windows with a dead motor?

the only way i know is to disconnect or remove the motor and manually move the window up until the motor is replaced. sometimes also it could be just the switch.