check the pcv valve, locate it on the valve cover with a hose hooked up to it from the intake maifold. romove it for valve cover and remove hose, and shake it if you dont here the valve moving up and down, then it is bad, it cost a couple of dollar a parts store, and should solve your problem
The throttle, fuel injection system or governor need servicing/replacement.
Actually the Fuel Injection Relay is located under the dash on the left (drivers) side above the emergency brake line, It can be removed with a phillips screwdriver and remove the two connectors
The injection rate is the number of injections. The injection pressure is the pressure the injection is under.
To replace a Yamaha two-stroke oil injection pump, first, disconnect the battery and remove any covers obstructing access to the pump. Disconnect the oil lines and electrical connectors from the old pump, then unbolt and remove it from the engine. Install the new pump by securing it in place, reconnecting the oil lines and electrical connectors, and finally, prime the system to ensure proper oil delivery before starting the engine. Always refer to the specific service manual for your model for detailed instructions.
an injection under the skin is called a sucutaneous injection.
Not from the injection.
Injection
An injection into muscle is called 'an intramuscular injection.'
Airless injection or solid injection - Injection of fuel directly inti the combustion chamber without primary atomisation is called airless injection. it is nothing but mechanical injection only.
no
The plural of injection is injections.
fat injection.