answersLogoWhite

0

I am experiencing an ignition problem my self right now. I have fuel pressure but no spark. I am beginning troubleshooting it now. Nothing out of the distributor, so im going to test input to it. ANy idea where i can find some specs on this? 2003 Xterra no spark.

ckeck the knocking sensor. if it bad let me know call +2347054969173

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do reset Abs light on 2000 Nissan Xterra?

To reset the ABS light on a 2000 Nissan Xterra, first, ensure that the vehicle is in a safe position and the ignition is off. Turn the ignition key to the “ON” position without starting the engine, then press the brake pedal three times. After that, turn the ignition off and then back on again. If the ABS light does not turn off, it may indicate an underlying issue that needs to be diagnosed.


How to reset serviuce oil light on a 2009 Xterra?

To reset the service oil light on a 2009 Nissan Xterra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and start the engine to ensure the oil light has reset. If the light remains on, repeat the process.


How do you get abs codes to flash on abs dash light on 2000 Nissan xterra?

With the ignition off, ground terminal 8 on the data link connector. Turn on the ignition and the ABS warning light light will then begin to flash any codes stored. See the Chilton or Hayes manual for the Xterra to confirm which terminal is number 8. There are pictures and the related procedure in both these books.


When was Xterra Triathlon created?

XTERRA Triathlon was created in 1996.


When was Nissan Xterra created?

Nissan Xterra was created in 2000.


How do you turn off the alarm on a Nissan Xterra without the remote?

I just had this happen and got the alarm to stop by putting the key in the drivers door and the ignition- I don't remember which one made it stop.


How do you reset airbag light in Nissan Xterra 2000?

To reset the airbag light in a 2000 Nissan Xterra, first, ensure the ignition is turned off. Then, disconnect the negative battery terminal and leave it disconnected for about 10 minutes. Reconnect the battery terminal and turn the ignition to the "ON" position (do not start the engine) for about 10 seconds, then turn it back to "OFF." Finally, start the vehicle to see if the airbag light has reset. If it remains on, there may be a persistent issue that requires professional diagnosis.


How do you change a distributor on a Nissan Xterra?

How do you remove a distributor on a 2000 nissan xterra


How do you change the starter on a Nissan Xterra?

how to replace a starter for a nissan xterra 04


What sort of floor mats does the 2011 Nissan Xterra have?

The 2011 Nissan Xterra has .


What sort of floor mats does the 2010 Nissan Xterra have?

The 2010 Nissan Xterra has .


What sort of floor mats does the 2012 Nissan Xterra have?

The 2012 Nissan Xterra has .