0
yes you can do this yourself by taking out the shifter and cutting it shorter with a saw. but then you will need to re-thread the shifter in order to screw a knob on. unless you have a knob that attaches itsself to the shifter with screws on the side. this is a ghetto way of doing it, but will work. or if you have $100-$200 to spend, simply buy a cimplete new short shifter off ebay, or anywhere and install it yourself which is a pretty simple job. take off the dash surrounding the shifter by popping it outwith a flat-head screw driver or your fingers. unattach the shift boot (the leather-like material surrounding the shifter. from here, you will be able to see the top of your transmission, where the shifter goes in. unscrew the plate on top of the transmission, and slide out the whole shifter. simply repeat this process in reverse to install your new aftermarket short shifter, making absolutely sure you are putting in the white plastic bushing at the end of the shifter that goes into the transmission, which ensures that it is secure and there is no play in the shifter.
What else can I help you with?
Where is the overdrive button on your shifter on a 1989 Nissan 240SX?
on the shifter the left hand side just under the shift button.
How do you take the rubber off a short shifter?
Cut It
The transmission in the 1991 240sx smokes by the shifter when driving What causes it to smoke?
could be burning either gear oil, or motor oil. check for leaks and replace gear oil
Who makes a short shifter for the 87 Nissan 300zx?
I believe Fidanza does...
How much horsepower does a short shifter add?
Does not effect engine's output.
1989 Nissan 240sx auto od button on stick shifter will not stay depressed od dash light is on car doesn't shift into od but if button is held depressed od will work light goes out any ideas?
sounds like you need to replace the OD switch in the shifter.
Do you need a smaller boot for a short throw shifter?
"Short Throw" really is talking about the distance the shifter has to travel between shifting not necissarily the height of the shifter. In that case, no you don't need a different boot. Now put on a "shorter" shifter, which in case does not mean a new boot, because the boots are made of a flexible material and will fit a shorter shifter. If you put on a taller shifter, anything higher than 4 inches greater than factory, will need a custom made boot.
Does someone make a 2 cable shifter for a shifter kart?
does anyone have any drawings on how to make a shifter set up for a kx85 moter for my kart ,, i just need some drawings or a few pictures
Is a 1995 Nissian 240SX Engine compatible to 1992 Nissian 240SX?
Is a 1995 Nissian 240SX Engine compatible to 1992 Nissian 240SX?
How do you change the shift knob on a 2003 tiburon with a manual trans?
You should just unscrew it off the shifter. It might be on there tight, but it should just screw off. I put the stock shifter knob on my B&M short throw shifter
Would 1997 Nissan 240sx headlight's fit into a 1995 Nissan 240sx if not then what do i need to do to make them fit?
no it will not. To fit 97-98 headlights onto a 95-96 240sx you will need these 97-98 240sx parts: headlights hood front fenders front bumper front grill maybe the front bumper support
95 240sx engine bolt to 93 240sx car?
Yes. Despite the small differences in engines they are interchangeable. Just make sure you use the 95 engine harness.
