0
It can be done. But for a price. The 420A motor (GS and GS motor) have the transmission sitting on the right side. (If your looking at the front of the car) And the 4G63 (GS-T and GSX motor) Have the transmission sitting to the left side. So just a straight motor swap is NOT possible. But I suppose if you got a GS-T motor and transmission then you can remount the motor and transmission mounts, but you would probably have to relocate everything, such as the ecu and battery and whatnot. So to answer the question, technically, it is possible. But illogical. You would be much better off just selling the GS and getting a GS-T, or just put a turbo on the GS.
What else can I help you with?
Can you change your 4g63 engine for 420a?
Are you talking about taking a 4g63 out and putting a 420a in? If so, i don't understand, why at all, you'd do that.
How do you replace a 420a with a 4g63?
VERY HARD AND VERY EXPENSIVE. I do not recommend. You would spend less money buying a talon or eclipse with the 4g63 engine!
Is the wiring on a 4g63 non turbo the same of a 4g63 t?
Yes, the same harness was used in the non turbo as well as the turbo, Unless you have the 1.8 liter or the 420a engine.
Will the transmission of a 4g63 work on a 420a?
no, the transmission for the 4g63 is on the passenger side, the 420a is on the driver's side. you will have 5 speeds in reverse and 1 speed in forward if you try this even with a transmission adaptor.
Would a 4g63T engine replace a 420A and work with the current transmission in a 96 Eclipse RS?
No, The 4G63 engine is turned around a 180 degrees compared to the 420A. It would take heavy modifications for it to work. The best thing to do is to rebuild your old motor and put a turbo on that! Just remember to get low compression ratio cylinder heads.
Can you use a a turbo exhaust manifold off of a 4g63 on a 420a?
It will bolt on, but to answer your question, no.
What kind of engine is in a 1995 Mitsubishi Eclipse?
The 1995 Mitsubishi Eclipse is the second generation model. The US version had a Chrysler 420A engine, and the Europe version a Mitsubishi 4G63 engine.
What engines can be put into a 1997 Eagle Talon?
4g63 (Turbo) or 420A (non-turbo)
Turbo engine to non-turbo body Can you swap a 2nd generation Talon or Eclipse turbo engine into a 2nd generation non-turbo body?
The simple answer is yes. there are two engines in talons, lasers and eclipses. or better known as dsm's. (diamond star motors). there is the 4g63, and the 420a. which both come in turbo and non-turbo models. if you are looking to swap a turbo 4g63 into a non turbo 4g63 shell, the swap is simple. same as if your swapping a turbo 420a into a non turbo 420a shell. now, if your looking to swap a turbo 4g63into a nonturbo 420a or vise versa, you will encounter problems with motor mounts, wiring etc. keep in mind the wiring and ecu's etc will be different on each motor.
Will a 2000 model eclipse engine work in a 1997 eclipse?
negative only 420a motor for non turbo or 4g63 for turbo model...or extensive modifying. i don't know why you would want to. 2000+ eclipse motors are garbage as well as the dodge 420a non turbo motor...the only motor that sould have ever been put in the eclipse is the 4g63 period.
What engines can be put into a 1991 Eagle Talon?
4g63 and 420a or make conversions for any that you want to fit.
Would you be able to replace a 420a out of a 98 eclipse with a 4g63 and a new six speed trans from a third gen eclipse will it bolt up?
No - the 3rd generation Eclipse was only available with a 5MT.
