No, The 4G63 engine is turned around a 180 degrees compared to the 420A. It would take heavy modifications for it to work. The best thing to do is to rebuild your old motor and put a turbo on that! Just remember to get low compression ratio cylinder heads.
usaully by unbolting it from the engine and dropping it down, what year and what engine?
It's in between engine and transmission. If you want to see it, you will have remove the transmission.
In between the engine and transmission
It is between the engine and the transmission. You have to remove the transmission to replace it.
To replace the clutch you must separate the engine and transmission. For a front wheel drive vehicle, separating the engine and transmission can only be accomplished by removing the engine.
no you cant in 92 they went from a six to 7 bolt main.
How do you replace a transmission solenoid on a 2001 dodge Dakota 4.7 engine 4x4 location?
You have to pull the engine.
Seperate the engine and transmission
No, the engine does not have to be removed.
Between the engine and transmission inside the bellhousing, you need to remove the transmission from the engine to see/replace it.
No. The transmission is removable.