when you hook up the battery and the alarm goes off hit the unlock button on your door lock remote.
unhook the battery for a few minutes.
The easiest way to reset the your 2007 Mitsubishi Lancer car alarm is to remove the car alarm fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
Disarm the alarm before removing the battery.
Lock and unlock the driver door with the remote if the alarm is on because of a disconnected battery.
There is not a way to switch off the speed alarm in a Mitsubishi by yourself. You can take the Mitsubishi to a dealership and have them scan it for you.
To disable the alarm on the Mitsubishi Montero sport without the alarm key you have to open the door. Otherwise it is not possible.
It could be that the battery in the remote is low. Replace the battery first. If that does not fix the problem, take it to a shop that repairs car alarms. Many have been fixed just by replacing the battery. Prior to the battery going completely out, it will cause the alarm to misread.
How to arm car alarm mitsubishi adventure gls sports
To remove the smoke alarm cover and change the battery, first locate the tabs or screws on the cover. Use a screwdriver or twist the tabs to unlock the cover. Carefully remove the cover and replace the old battery with a new one. Make sure to test the smoke alarm after replacing the battery to ensure it is working properly.
I have the same problemsaab 95 kombi - 1999you have to change the battery of alarm system (change the horn complete ;-( filo from Swiss
It should be done once a month
you pop the hood and behind the battery slighty to the left you find a small red cable, carefully pull it off and bam!