0
What else can I help you with?
Where is the speed sensor on a 94 integra?
speed sensor is located next to the throttle body
Is the crankshaft position sensor and engine speed sensor the same thing on a 2004 Nissan altima?
is the crankshaft position sensor the same and the engine speed sensor
What does code p1337 mean on Honda civic 99?
This code is related to the CSF Sensor and it indicates NO signal from it. CSF = Crankshaft Speed Fluctuation This sensor connector is located below by the timing belt (under the intake manifold).
Where is the citroen c5 speed sensor?
where is the crankshaft sensor on c5
Is the crankshaft sensor the same thing as a camshaft sensor?
No. The crank sensor reads the crankshaft location and speed. The cam sensor reads the camshaft.
How do you change the speed sensor on a 98 integra?
Remove the wiring harness from your speed sensor. Remove the speed sensor retaining bolts. Reverse the process to install your new speed sensor.
Where is the speed sensor located for a 1989 integra?
The speed sensor on a 1989 Acura Integra is located on the transmission. It is a small unit with a two-wire clip which connects to the main engine harness of the vehicle.
Are the cam position sensor and crankshaft sensor the same thing in a 1999 sebring convertible v6?
No, the crank sensor reads crankshaft speed. The cam sensor reads camshaft speed. The cam sensor is on the distributor on a 1999 2.5L
Function of crankshaft position sensor?
Crankshaft position sensor function is to monitor the position or rotational speed of the crankshaft. It is an electronic device and it is used in the internal combustion engine.
Where is the crankshaft speed fluctuation sensor on a 1999 Honda civic ex?
it is located behind the timing belt cover at the bottom half. you will need to remove the belts, crank pulley (reverse threads) and the attaching bolts to the plastic cover. it is the only sensor located next to the crankshaft it self. two wires one blue and one white. goodluck.
How does a diesel engine pickup a tach signal?
From a crankshaft speed/position sensor.
Ecu error code 17 in 1988 Acura Integra?
The ecu code 17 in the 1988 acura integra is for the VSS (vehicle speed sensor). Hope this helps you.
