While the Rav4 is turned off, pull the emergency brake up one click and then start it up. This will leave the running lights off and the emergency brake will not be engaged when it is pulled up only one click.
Our daytime running lights just stopped working on our 2007 Toyota rav4 bulbs???
Hit 'em with a big hammer
To stop running the DRL daytime running lights in the 2005 Toyota Echo the headlight relay needs to be modified. The DRL module on the relay needs to be cut and relay inserted into the harness.
Yes! For a 2007 Toyota Highlander Hybrid, at least, all it takes is the removal of one relay labelled DRL to deactivate with no ill effects. It's a five-minute job that took me almost a year to discover.
Since daytime running lights is not implemented in my country, I had to take my 2005 Toyota rav 4 to a car electritian specialist who fixed the problem .He took part of the dashboard off and told me that he is going to bypass going thru the ECM. The whole process took between three and four hours and enabled me to fix this annoying daytime running lights.He charged me only 60 $ for the whole process.
Check the fuse box (the one under the hood I think) for a fuse marked DRL and pull it. If not in that fuse box, check the fuse panel on the left side under the dashboard.
What make/model vehicle?What vehicle?Toyota Rav4 2002
Daytime running lights can be turned off by removing the fuse that controls them. The fuse is in the passenger compartment fuse box. The fuse number is D5.
To disable the daytime running lights (DRL) on a 2007 Toyota Matrix, you can locate the DRL fuse in the fuse box under the dashboard or in the engine compartment and remove it. Alternatively, some models allow you to disable DRL through the vehicle's settings, so check your owner's manual for specific instructions. If you're unsure, consider consulting a professional mechanic for assistance.
The 2000 Toyota day time running the light relay switch can be found below the dashboard. The switch will be on the passenger side of the passenger compartment.
You have to remove dayltime light sensors, or reprogramm the computer. Also you can find the fuse for daytime lights and remove it.
You cannot turn them, at leas not officially. The work around is to remove running light relay.