To change the serpentine belt on a 1998 Acura CL, start by disconnecting the negative battery terminal for safety. Locate the tensioner pulley and use a wrench or ratchet to relieve tension on the belt. Carefully remove the old belt, making a note of the routing path, then install the new belt following the same path. Finally, release the tensioner to secure the new belt in place and reconnect the battery.
buy a belt, loosen the tensioner, replace belt
serpentine belt diagram for 98 jetta tdi
That I know of, there is NO serpentine belt, unless you are talking about the the Timing Belt (hardly serpentine, but anyway), it has a belt tensioner, not automatic, though.
serpentine belt for 97 7.4 454 Chevy truck
Find the appropriate size socket to go on the belt tensioner, put it on a ratchet or breaker bar. Rotate the belt tensioner counterclockwise, and that'll loosen the slack and allow you to remove the serpentine belt.
Looking at the engine from the passenger side fender the serpentine belt revolves around 5 different pulleys. Theres only 1 belt ,,,,the serpentine.
it is under the alternator
YOU DONT IT HAS A AUTO BELT TENSIONER
how to change alternator in acura 1999 cl
Show diagram
You don't - it is a serpentine belt with an automatic tensioner.
Mine on the 98 is a belt. It is behind the serpentine belt under covers on the front of the engine.