0
Buy the repair manual for the car. It will pay for itself quickly.
1) Rotate crankshaft to align the flywheel pointer to TDC of the No. 1 cylinder compression stroke.
2) Make sure timing pointer must be aligned with the white mark on the flywheel; the cam pulley must be set so the small dot or the word UP is vertical and the marks on the edges of the pulley are aligned with the surface of the head.
3) Fit the belt to the engine and slide it onto the cam pulley. Loosen the adjusting bolt slowly, allowing the adjuster to move against the belt. Tighten the adjuster bolt temporarily.
4) Install the lower timing belt cover.
5) Install the crankshaft pulley and key.
6) Adjust the timing belt tension. Loosen the adjusting bolt. Rotate the crankshaft counter clockwise until the camshaft pulley has moved 3 teeth. Tighten the adjusting bolt to 31 ft. lbs
7) Install the water pump belt and pulley, drive belts
8) Install upper timing belt cover and valve cover.
9) Start the engine, allowing it to idle. Listen carefully for any indication of the belt rubbing or slapping the covers.
What else can I help you with?
Timing marks 2000 Honda Accord lx 2.3?
timing marks on a Honda accord lx 2.3 year 2000 specifically the counter balance shaft
What is the timing mark for 1990 Honda accord?
there are two kinds of timing marks. one is for ignition timing and one for valve timing.
What are the timing marks on the balancer belt on a 1992 Honda Accord?
I just changed a timing belt in a buddys 1990 accord and you need to set the marks on the pulleys to same direction as your crank pulley mark is.
What is the timing marks on 84 Honda accord 1.8 stick there is no marks on the balancer..?
The hole for the timing marks is located on the front of the engine, right below the distributor. You'll have to remove the hood to get a good angle for the timing light (I don't know why they designed it that way).
How do you align timing marks on 2000 1.8 Mitsubishi Mirage?
timing marks 1.8lt Mitsubishi 2001
How do you align timing marks on 1.8 Mitsubishi mirage?
how do you align timing mark on 97 1.8 Mitsubishi mirage
How do you align the timing marks on 4m51 Mitsubishi canter?
timing on 4m 51 engine
How do you set timing on a 2006 Honda rancher 400?
To set the timing on a 2006 Honda Rancher 400, first ensure the engine is at top dead center (TDC) on the compression stroke by aligning the timing marks on the flywheel with the mark on the engine case. Remove the timing inspection cover to access the timing marks. Adjust the position of the camshaft if necessary to align the marks accurately, ensuring the timing chain is properly tensioned. Reassemble the cover and check the timing by starting the engine to ensure it runs smoothly.
You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?
You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?
How do you align the timing marks on a 1991 Geo Prizm?
i need help
Where are the timing marks on a Peugeot 306?
On a Peugeot 306, the timing marks are typically located on the crankshaft pulley and the timing cover. You can find a mark on the crankshaft pulley that aligns with a corresponding mark on the timing cover. Additionally, there may be timing marks on the camshaft sprocket, which should align with the cylinder head. It's essential to ensure these marks align correctly during timing belt replacement or engine maintenance.
Where are the timing marks on a 2000 Honda civic ex coupe?
The timing marks on a 2000 Honda Civic Ex Coupe are on the crank pulley. They are also on the cam.
