To adjust the fan belt on a Matiz 800SE, first, locate the belt tensioner and loosen the bolts securing it. Then, adjust the tension by either moving the alternator or the tensioner itself, ensuring the belt has about half an inch of play when pressed in the middle. Once the desired tension is achieved, tighten the bolts securely and check for proper alignment. Finally, start the engine and observe the belt to ensure it runs smoothly.
To adjust the fan belt on a Daewoo Matiz, first, locate the tensioner pulley and loosen the bolts holding the alternator in place. Then, adjust the tension on the fan belt by moving the alternator until you achieve the desired tension. Finally, tighten the bolts on the alternator to secure it in place and check the tension again to ensure it's properly adjusted. Always refer to the vehicle's service manual for specific instructions and torque specifications.
ask your mom how she adjust her belt then you'll know
replace the belt or adjust it
how do I loosen fan belt to remaove alternator for replacement of alternator?
The alternator is rotated on it's pivot to adjust belt tension.
To change the fan belt on a Daewoo Matiz, first, ensure the engine is off and cool. Remove the engine cover if necessary, then locate the fan belt and loosen the tensioner by adjusting the tensioner bolt. Slide the old belt off the pulleys and replace it with the new one, ensuring it fits properly in the grooves. Finally, re-tighten the tensioner to the appropriate tension and replace any covers.
HOW How do you FIT A NEW a fiat doblo 1.9jtd fan belt?Read more: How_do_you_adjust_a_fiat_doblo_1.9jtd_fan_belt
Automatic tensioner-no provision for adjustment.
it dosent have fan belt the fans are electric if you mean the serpentine belt there a12 or 14 bolt in front of the pulley beside the alternator you have to loseit a litle and adjust the bolt that ist facing up on top of the alternator beside the timmin chain cover
To tighten the fan belt on a Renault Master, a person needs to adjust the belt tension wheel. This wheel has a bolt that is inserted in a groove. The bolt can be loosened and then moved to the desired location to tighten the belt.
If it is a serpentine belt the automatic tensioner will adjust the belt for you. If it is an older "V" type belt--there should be 1/2" "play" at the middle of the belt, between the pulleys.
I believe it to be on the fan belt mechanisim..the pulley that allows you to adjust the tension.