there is an Allen screw and a nut on the throttle cable you loosen the nut and the screw and adjust it to make it idle up or down.
how do you adjust the idle on a 2002 toyota van
you can adjust it via the idle control valve.
To adjust the idle speed on a 2003 Toyota Sequoia, you typically need to start with the engine at operating temperature. Locate the idle air control (IAC) valve, which is positioned on the throttle body. Adjust the idle speed by turning the IAC adjustment screw, if applicable, while monitoring the engine's RPM with a tachometer. However, it's important to note that the idle speed is often controlled by the engine's ECU, and any adjustments should be done carefully to avoid causing engine issues.
You dont adjust the Idle disconnect the battery for 10 mins and reconnect and the computer should relearn it idle .
smash it into the wall
You can't. Toyota Camry uses throttle position sensor to adjust idle. If your car does not idle you need to check computer for error codes. If you do not have any, most likely you will have to do tune up on your engine and maybe even fuel system. But starters check the air filter and replace if you did not do that in a while or if it looks dirty.
If your engine has a carburettor turn the idle adjust screw so the idle is at the proper speed. If your engine has fuel injection the ECM controls the idle.
It is nonadjustable. It is controlled by the computer.
To find the idle adjust on a caterpillar 3406 engine refer to the owners manual. If this doesn't help, contact the manufacturer.
You adjust the run and idle speed with the governor wire...loosen the nut and adjust it.
How do you adjust the idle speed on a citroen berlingo 1.9d (basic diesel engine)
does the engine have a carburetor or is it fuel injected? A carbed engine has mixture screws along with a base idle screw, a fuel injected engine the idle is computer controlled.