Where the cable hooks on to the transmission there should be a little screw what adjusts the cable.
kickdown cable. it connects to the linkage on the carb's throttle. as the throttle goes in the kickdown goes out.
When the throttle blades are wide open, the kickdown cable should be ALMOST completely extended.
To adjust the kickdown cable, you'll need to pull up on the release and open the throttle all the way. After that, pull the outer cable housing tight and adjust the clamp. When you are finished, the outer housing should have no slack.
if the clutch is cable yes there is an adjuster down beside the transmission follow clutch cable
There is no cable.... Its electronic.
Shift cable? or bar.
the first cable - after +
you should see a little knob near the front of the engine, slightly to the left of where you put in the oil it'll be connected to a cable that goes underneath, that'll be the clutch cable, turn the knob, it will adjust the clutch, take it to a garage, they'll charge you 60-200 bucks
First follow the cable out from the driverside firewall all the way across the motor and down the passenger front. The cable has a plastic nut that turns by hand.Its a little bigger then a bottle cap.
how to change a toyota 4runner kickdown kabel
Follow the clutch cable to the transmission where there is like a not to turn up or down depending on how you need to adjust the clutch. Just can not remember which way to turn for what maybe someone else will add that part