you can't it is controlled by the computer.
WHATS THE TIMING MARKS ON 93 MAZDA 929
I would suspect you need a new timing chain or belt depending on which is installed. A worn belt or chain will jump time.
In a 1989 Nissan Pulsar NX : The 1.6 litre four cylinder engine has a timing CHAIN The 1.8 litre four cylinder engine has a timing BELT
.144
The brake fluid reservoir on a 1989 Mazda 626 is on the master cylinder. This is located in the engine compartment on the drivers side.
Yes, a Mazda B2000 is most definitely a 4-cylinder with a 2.0L engine. However, technically Mazda didn't produce the B2000 as a 1988 model. It was made in 1986-1987. Then in 1989 Mazda made the B2200 Pickup, which is a 2.2L 4 cylinder.
I have worked on many engines, I would guess broken valve. Check every cylinder with a pressure gauge. If zero broken valve, if all have good pressure, timing. If timing good, fuel. maybe flooding.
most likely a belt, mine has the belt
You cannot adjust the clutch. It is hydraulic, with a master cylinder and slave cylinder in the transmission. Their are no adjustments. Make sure system has fluid and no leaks.
All mazda b series with a b2000 or b2200 are a NON interference engine.So in short if your timing belt broke it will not damage the engine.
where are timing marks on 89 ford probe 4 cylinder I have the bottom not the top