To set the ignition timing on a Ford Probe GT 95 with an MX engine, remove the two 12 mm head bolts holding the distributor in place. Then rotate the distributor to set the ignition timing.
motorcraft.com shows for the 1990 Ford Probe 2.2 L ( 133 cubic inch ) 4 cylinder : ignition timing : 6 degrees BTDC , and --------------------------------------------------------------------------------------------------------- 9 degrees BTDC - manual transmission - with turbo - with self test connector grounded
Ford Probe was created in 1989.
The ignition timing is computer controlled - not adjustable - but the base timing is 10 degrees BTDC
how to check the fluid on a manual transmission for a 1989 ford probe gt
The 1991 Ford Probe spark ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
Defective ignition switch or tumbler assembly.
The first model year of the Ford Probe ( in North America ) was ( 1989 )
if you have the exhaust manifold, oil lines, etc. from the 89 GT then yes.
Ignition timing or valve timing?
Built into the distributor.
They are on the camshaft and crankshaft sprockets