To change the AC belt on a 2000 Mitsubishi Mirage, first, ensure the engine is off and cool. Locate the AC belt tensioner and loosen it using a wrench to relieve tension on the belt. Remove the old belt, then install the new one by routing it according to the belt diagram, usually found under the hood. Finally, retighten the tensioner and check the belt alignment before starting the engine.
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
To change the AC compressor on a 2000 Chrysler Cirrus, first disconnect the battery and recover the refrigerant from the AC system. Next, remove the serpentine belt and disconnect the compressor's electrical connector and refrigerant lines. After unbolting the compressor from its mounting bracket, replace it with the new unit, ensuring all seals are replaced. Finally, reconnect the refrigerant lines, electrical connector, and serpentine belt, then recharge the AC system with refrigerant.
buy a belt, loosen the tensioner, replace belt
Yes
Could also be the belt tensioner ...
yes
Junk the car. Problem solved.
first unscrew nut on pulley then unscrew belt tensioner on main larger fan belt,then do the same on alternator belt tensioner on left side of motor.once you have conquered that crawl under truck and do the same to the powersteering belt which is located under ac compressor
You can ask your locale dealer for a copy of the belt route, or ask to buy a belt route label for your Neon
Replace your a/c evaporator filter under dash. Liquid refrigerant is getting back to compressor causing belt to break.
to change 2000 Chevy cavalier a/c evaporatorto fix it
YES, 2 different adjustments on that year