answersLogoWhite

0

I have the 95 model of the sc300 so I don't know if it's exactly the same or not...I can only imagine though, that it is very close. There are three screw studs behind the covering in the trunk. On the passenger side tail light I found it also helps to un-bolt the trunk lock. It takes a 10 mm wrench or socket for both the nuts on the studs and the bolt for the trunk lock. There is one stud just under the lock on the passenger side tail light and then the other two are located at the far end of the tail light just above where the disc changer eject button is. I also found that if you push on the single stud, while pulling on the end of the light assembly with the two studs it helps to get the entire assembly out. After that it's a matter of finding the light that is out by twisting, counter clockwise, to unlock each light assembly from their individual hole.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

Where is the tensioner pully on a 1992 Lexus sc300?

Where is the tensioner pully on a 1992 Lexus sc300


What does the TRAC light on a 1992 Lexus SC300 mean?

It's for better traction in the snow.


Will a 1995 Lexus SC300 Tail lights fit on a 1992 Lexus SC300?

yea, same size


How many 5 speed Lexus sc300's were made in 1992?

It is unknown how many manual Sc300's were made each year; but Lexus reported 2000 on the road in 1997' -Granville the Lexus man.


On what autoparts website can you buy the Automatic transmission solenoids for 1992 Lexus SC300 L6-cylinder?

Junkyard, E-Bay, Stealership


Auto repair estimation before go to shop?

i have a Lexus coup sc300 year 1992 i need a engine and my intake manifolds are bad


Where can you get a vacuum diagram for a 1992 Lexus sc300?

You can obtain a vacuum diagram for a 1992 Lexus SC300 from several sources. The vehicle's service manual, often available for purchase online or at auto parts stores, typically includes detailed diagrams. Additionally, automotive forums, enthusiast websites, and platforms like Lexus or SC300-specific groups on social media may have shared diagrams or can provide guidance. Lastly, websites like eBay or Craigslist might list service manuals or repair guides that contain the information you need.


What must be done when a 1992 Lexus sc300 wont keep charge after altinator change What is the problem?

Bad battery? Could be the wiring harness in the charging system. If the replacement alternator was a used part, it might also be bad (yes this has happened to me).


Where is the fuel pump for a 1992 Lexus sc300?

I believe the fuel pump is underneath the back seat, and the back seat needs to be removed to access it. This is not difficult, but does require 2 people.


Can 20 inch rims fit on a 1992 Lexus sc300?

Yes... it backwheel drive so your tire size should be 245/35/20... they might rub a little when you have a few people in the car...


How do you change window switch in a 1992 sc300?

To change the window switch in a 1992 SC300, first, disconnect the negative battery cable to ensure safety. Then, remove the trim panel around the window switch by carefully prying it off with a flat tool. Next, unscrew the window switch from its mounting and disconnect the electrical connector. Finally, replace it with the new switch, reassemble the trim panel, and reconnect the battery.


How do you open the trunk on a 1992 Lexus SC300 with out a key?

To open the trunk of a 1992 Lexus SC300 without a key, you can try accessing the trunk release lever located inside the vehicle, typically near the driver's seat. If that’s not an option, you may need to fold down the rear seats (if applicable) to gain access to the trunk area. Alternatively, using a slim jim or a coat hanger to manipulate the lock mechanism can work, but this may require some skill and can potentially damage the locking system. Always consider contacting a professional locksmith if you're unsure.