0
1. Disconnect negative battery cable 2. Remove the steering column covers and lower instrument panel cover 3. To remove the electrical portion of the ignition switch follow the harness back and disconnect the electrical connector then remove the screw and detach the switch from lock cylinder housing 4. Lower the steering column 5. The switch/lock cylinder housing is clamped to steering column by shearhead bolts. Use a chisel and hammer to tap the bolts in a counterclockwise direction to unscrew them 6. Remove the lock cylinder/ignition switch assembly from the steering column
What else can I help you with?
Hyundai Elantra no crank and than it starts?
The ignition switch could be bad if a Hyundai Elantra has no crank and then starts. The fuses which are tied to the ignition should also be checked.
Where is the ignition switch on a 1997 Hyundai Accent and how do you change it?
changeing ignition barral
How do you change the ignition switch on a 2002 Hyundia Accent?
To changeÊthe ignition switch on a Hyundai Accent, first, one should remove the switch from the steering column, to which it is attached. From there, the component can be replaced.
Why does the brake pedal get stuck after you changed the brake light switch on your Hyundai elantra?
the switch needs to be adjusted
How do you remove the clutch pedal switch on a 2003 Hyundai elantra?
To remove the clutch pedal switch on a 2003 Hyundai Elantra, first, ensure the vehicle is in gear and the ignition is off for safety. Locate the switch mounted on the clutch pedal assembly, typically near the top of the pedal. Disconnect the electrical connector by pressing the tab and pulling it off, then remove the switch by unscrewing it or twisting it counterclockwise, depending on the design. Finally, replace it with a new switch by reversing the steps.
Where is kill switch Hyundai Elantra 2008?
The kill switch for a 2008 Hyundai Elantra is typically located under the dashboard near the steering column or near the driver's side kick panel. It may be a small toggle switch or button that needs to be pressed or turned to disable the vehicle's ignition system. If you're having trouble finding it, refer to the owner's manual for specific details regarding its location and operation.
Where is the ignition switch located on a 1994 Hyundai scoupe?
generally, the ignition switch is where u put the key
Does a 2000 Hyundai elantra have a fuel cut off switch?
i have one and i can say definitively no, they do not.
Where is the relay switch for a 99 Hyundai elantra turn signal?
Under the hood in the fuse box.
Where can you find the fuel pump shut off switch on a 2004 Hyundai Elantra?
You will not find it because it does not have one.
What fuse do you change on a 2008 Hyundai elantra if the rear brake lights and third rear brake lights do not work?
it would be the brake light switch about 20 dollars at autozone
How do you change the ignition switch on a 1996 GMC Yukon?
howdo you change an ignition switch on a 1996 gmc jimmy howdo you change an ignition switch on a 1996 gmc jimmy
