1993 Nissan 240sx headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
To change the headlight bulb on a 1995 Nissan 240SX, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector by gently pulling it off, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, as oils can cause it to burn out. Finally, reinsert the bulb socket, reconnect the electrical connector, and test the headlight.
take out the bulb
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
Check the bulb Check to see if you are getting power to the socket
To change a headlight bulb in a 2005 Nissan Murano, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight by pressing the tab and pulling it off. Remove the bulb by turning it counterclockwise, then replace it with a new bulb, ensuring it is securely in place. Finally, reconnect the electrical connector and test the headlight to ensure it works properly.
To change the headlight bulb on a 1994 Nissan Altima, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector by gently pulling it off the bulb. Next, twist the bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring not to touch the glass part of the bulb. Finally, reinsert the bulb socket, reconnect the electrical connector, and test the headlight.
To change the headlight bulb on a 2004 Nissan 350Z, first, open the hood and locate the back of the headlight assembly. Disconnect the wiring harness by gently pulling it away from the bulb. Twist the old bulb counterclockwise to remove it, then insert the new bulb by aligning it and twisting it clockwise to secure. Finally, reconnect the wiring harness and test the headlight to ensure it’s working properly.
http://www.nissanclub.com/forums/general-nissan-altima-discussion-1993-2001/260207-how-change-headlight-bulb-96-nissan-altima.html Copy and past that into your web browser. Its for a 1996 but it should be close. I know the bulb is different so look up what bulb you will need. Other then that the steps should be really close.
To change the light bulb on a Nissan Micra first lift the hood of the car. Find the headlight housings the pull the light bulbs from the ballast. Replace the bulbs.
To change the headlights on a 2006 Nissan Titan, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws holding the assembly in place and carefully pull it out. Disconnect the electrical connector from the back of the headlight bulb, then twist the bulb socket counterclockwise to remove the old bulb. Insert the new bulb, reconnect the electrical connector, and reassemble the headlight assembly.
To change a headlight on a 2004 Nissan Titan, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight bulb and remove the rubber cover. Twist the bulb socket counterclockwise to release the old bulb, then insert the new bulb, ensuring not to touch the glass with your fingers. Reattach the rubber cover and electrical connector, and close the hood.
That would depend upon your make and model. I know on my Nissan 240sx to actually disassemble the headlight itself, you have to remove the glue attaching the glass to the backing of the headlight. This is usually done by heating it up in some sort of oven. If your just looking to change a bulb, Google your make and model and you should find sufficient results.