preferrably bring it to the dealer, but if you really want to do it yourself, you have to remove the front bumper. its a pain
with ur hands
The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
To change the headlight bulbs on a 2004 Infiniti G35, first, open the hood and locate the back of the headlight assembly. For the low beam, turn the bulb socket counterclockwise to remove it, then pull the old bulb straight out and replace it with a new one, ensuring not to touch the glass. For the high beam, follow the same process. Finally, reinsert the bulb socket and turn it clockwise to secure it back in place.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
Carry it to dealer who will replace on low beam headlight for $15 +/- dollars in about 5 minutes.
please answer the question
To change the low beam bulb on a 2004 Mercedes E320, first, open the hood and locate the headlight assembly. Remove the plastic cover or access panel on the back of the headlight to expose the bulb. Disconnect the electrical connector from the bulb, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, and reassemble the headlight by reversing the steps.
YES.....
To change a low beam headlight bulb on a 2004 Jaguar XJ8, first, open the hood and locate the back of the headlight assembly. Disconnect the power connector from the bulb by gently pulling it off. Remove the old bulb by turning it counterclockwise and then insert the new bulb, ensuring it's securely in place. Finally, reconnect the power connector and test the new bulb before closing the hood.
You can access the low beam headlight bulb from the engine compartment. Push the bulb holder in and turn. The bulb will come out.
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.