answersLogoWhite

0

The speedo cluster comes out by removing the lower plastic (one 10mm bolt and 4 screws) under the steering column. Next remove plastic covering column (helps ease the removal of cluster). Remove 2 retaining screws on cluster cover and remove. Next remove 4 retaining screws on cluster and pull away enough to reach around back and pinch retainer on speedo cable to disconnect. This can be difficult as the cable may bind and the cluster will not pull out far enough to get your hand in to pinch the retainer. If this happens, push the cable thru from the firewall as best you can. It is tight. To remove wiring, push on clip of retainer and gently pull back till it's removed. Remember to replace with a head from the same configuation of truck. A 4 cyl will not work for a 6 cyl truck. As usual, a 4 runner head will fit a pickup providing they are compatible years. Removing dash pieces from a Toyota pickup is very straightforward. Either they are held with screws or clip retainers that require a sharp pull. good luck.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you change the speedometer cable on a 1994 Toyota Paseo?

To change the speedometer cable on a 1994 Toyota Paseo, first, disconnect the negative battery cable for safety. Remove the instrument cluster by unscrewing the necessary screws and carefully pulling it out. Next, detach the old speedometer cable from the back of the cluster and from the transmission. Install the new cable by reversing the process, ensuring it's securely connected at both ends before reassembling the dashboard.


How do you change speedometer for 1986 mr2?

how to fix speedometer for Toyota mr2


How do you change the speedometer on an infinity g35?

To change the speedometer on an Infiniti G35, first, disconnect the battery to ensure safety. Remove the dashboard trim and the screws securing the instrument cluster. Carefully detach the old speedometer from the cluster and replace it with the new one, then reassemble the cluster and trim. Finally, reconnect the battery and test the new speedometer to ensure it functions correctly.


How do you change the light bulb behind the speedo on a 1992 Toyota MR2?

To change the light bulb behind the speedometer on a 1992 Toyota MR2, first, disconnect the negative battery terminal for safety. Remove the screws holding the instrument cluster in place and carefully pull it out. Locate the bulb holder at the back of the speedometer, twist it counterclockwise to remove it, and replace the old bulb with a new one. Finally, reassemble the cluster and reconnect the battery.


Does the mileage stay the same if you replace the speedometer cluster in a 1997 Jeep Grand Cherokee Or does it change when you put a new cluster in?

It will change to the mileage on the new speedo.


How do you change a speedometer on a Vauxhall vectra?

To change the speedometer on a Vauxhall Vectra, first, disconnect the battery to ensure safety. Then, remove the instrument cluster by unscrewing the necessary screws and gently pulling it out. Disconnect the wiring harness and replace the speedometer with the new unit, ensuring all connections are secure. Finally, reassemble the cluster, reconnect the battery, and test the new speedometer for functionality.


How do you replace front ring and pinion on a 89 Toyota pickup 4x4?

how do you change front ring and pinion on 89 Toyota pickup


What would cause the speedometer to stick on a 2004 cavalier manual trans how do you change the cable?

remove cluster fuse to reset cluster....if still not working properly replace cluster


How do you change the speedometer cable on a 1990 Toyota truck?

To change the speedometer cable on a 1990 Toyota truck, disconnect the cable, feeding it through the grommet, then disconnect it from the transmission. The process can then be reversed with the new cable.


Can you change a speedometer and leave the same tach from the same electronic dashboard on a 1998 Toyota Corolla VE?

Remove the instrument cluster and take it to a speedometer repair shop. They'll fix the speedo and you can reinstall the whole cluster. Or, do a search on the internet for speedometer or instrument cluster repair. There are several sites that do this. Rick I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com


Speedometer problem on a 97 Chevy s10 blazer Randomly it will go on and off could it be the sensor or do I need to change the cluster?

If both the speedometer and the odometer work on and off, I would blame the vehicle speed sensor. If only the speedometer is acting up, I would blame the cluster.


What is the easiest way to change the speedometer cable on a 1978 corvette?

There is no easy way. The instrument cluster will have to be removed.