With a small screwdriver, pry off the lens that covers the buld. Similar to most interior overhead bulb covers.
The dealer said that you have to remove the front bumper in order to even get at the bulb to change it!
you need to remove the rear seat
In you trunk, pull back the padding behind the tail light, and repalce the according bulb.
how to change tail light bulb on Toyota sequoia
You need to remove the headlight first. After removing the headlight, you will be able to unplug the power and remove the bulb from the housing. The new bulb comes ready to plug in.
Remove the turn signal light bulb connector. Take hold of the light bulb, push in and turn at the same time, to remove the light bulb. Reverse the process to install the new light bulb.
These are H7 bulbs.
get a new light bulb ,take the cover off the light bulb that's broken and replace it.
Hi you gota law on your back under the corner thers a flap take that cover off reach your hand inside and twist the bulb socket out its a 881 bulb.
is the foglight a one piece unit
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
go to halfords they'll do it for you,