Take out the two screws on each side using a Phillips head screwdriver. Pull down on the assembly until you can get ahold of it. I used a flat head screw driver to pry the flat back from the assemembly and the rubber gaskets. The bulb pulls out.
On a 2012 toyota Highlander, How do you replace tail light Assembly
The tail light fuse for a 2004 Toyota Highlander is located in the fuse box under the dashboard on the driver's side. To access it, remove the cover of the fuse box and look for the fuse labeled "TAIL" or "TAIL LIGHT." If the fuse is blown, replacing it should restore functionality to the tail lights. Always consult the owner's manual for specific fuse locations and ratings.
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
how to change the rear tail light bulb on a 2004 Nissan maxima
I have a 2004 highlander. I just finished the replacement. It was very easy. Open the back door to the highlander, remove the plastic compartment cover. You will expose the nuts and bolts that hold the asssembly to the car. Remove the nuts - be careful not to drop any inside the cavity. Once you have all the nuts removed, you can remove the lamps and pull the tail light assembly off. Put the new assembly on, replace nuts, and reinstall the lamps. Easy.
Sedan or hatch makes a difference
How do you change the tail light on a 2001 toyota sequoia
how to change tail light bulb on Toyota sequoia
To change the tail light bulb on a 2004 Mercury Mountaineer, first open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the assembly, then gently pull it away from the vehicle. Twist the bulb socket counterclockwise to release it, then remove the old bulb and replace it with a new one. Reinstall the bulb socket, reattach the tail light assembly, and secure it with the screws or clips.
How do you install passenger tail light kit for a 2004 grand cherokee?
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
To replace the tail light lens on a 2008 Toyota Highlander, start by opening the rear hatch and removing the screws or bolts securing the tail light assembly. Carefully pull the assembly away from the vehicle and disconnect the wiring harness. Replace the old lens with the new one, reconnect the harness, and reattach the assembly with the screws or bolts. Finally, test the tail light to ensure it’s functioning properly.