To change the oil filter on your 2007 Mazda 3 Hatchback, start by ensuring the engine is cool and then lift the car using jack stands for safety. Place an oil drain pan beneath the oil filter, then unscrew the old oil filter using an oil filter wrench. Before installing the new filter, apply a bit of new oil to the rubber gasket on the new filter and screw it on hand-tight. Finally, refill the engine with new oil and check for leaks around the filter after starting the engine.
take it to a garage ??
in my car is 3,45 l ( if you change oil filter(catrige))
on the side...
on the side...
CH9641
The oil capacity for a 2007 Mazda 6 varies depending on the engine type. For the 2.3L inline-4 engine, the capacity is approximately 4.5 quarts (4.3 liters) with a filter change. For the 3.0L V6 engine, the capacity is about 5.5 quarts (5.2 liters) with a filter change. Always refer to the owner's manual for the most accurate specifications.
Simple.. Just click on this link.. and you will see. http://robert.aitchison.org/tiki-page.php?pageName=Mazda3+DIY+Oil+Change
The Mazdaspeed3 is a sporty compact hatchback built by Mazda. This particular vehicle was produced in 2007 and is now in its second generation. The Mazdaspeed 3 is a performance enhanced version of the Mazda 5.
The Mazda Tribute has been production since model year 2007. The exact fuel filter will vary by year. The OEM fuel filter for the 2011 Mazda Tribute with the 3.0L V6 is Ford Motorcraft #FG872.
how do i change a fuel filter on 2007 Town & Country 3.3l
There is no filter.
In the 2007 Mazda 3, the air conditioner filter, commonly referred to as the cabin air filter, is located behind the glove compartment. To access it, you need to open the glove compartment, remove the damper arm, and then detach the compartment from the dashboard to reveal the filter compartment. The filter can then be removed and replaced as needed.