To change the ABS sensor on an Acura TL you will first need to make sure that the vehicle is parked on level ground and turned off. Loosen the lug nuts which hold the tire on that you wish to change the ABS sensor in. Jack up the wheel making sure you place a jack stand under the frame securely and continue to remove the wheel. Unplug the ABS electric wiring socket that you wish to replace. Use a socket to remove retaining bolts through the wheel hub assembly. Remove the wheel hub and you will find the ABS sensor behind this area. Remove the mounting bolts that hold the ABS sensor in place. Put the new ABS sensor in place and secure it with the mounting bolts. Reattach the wheel assembly hub and make sure it is secured in place. Plug the ABS wiring harness in. Replace the wheel and fasten it securely with the lug nuts.
how to replace front abs speed sensor
No
how do you install a bank 1 sensor 2 for an 1998 acura tl
my acura 2000 tl is stalling they said it might be the transmission stenoloide
My ACURA mechanic said @ 125,000 miles to change the Engine Coolant in my 2005 Acura TL.
The IAT sensor on a 1999 Acura Tl is located inside the air box. The sensor reads the temperature for the air that enters into the engine through the intake system.
How do you take out a radio in a 1996 Acura TL
The OS sensor on a 98 Acura 3.2 TL is located in the exhaust manifold. It constantly monitors the amount of oxygen remaining in the exhaust gases.
I was reading and found out that the IAT in integraded in the maf, so you wont find the IAT in the 2003 acura TL
i need step by step instructions on changing my radiator in my 1999 acura tl 3.2 liter
hey did u ever get an answer to your ? no
To change a headlight on a 1999 Acura TL open the hood and locate the bulbs which are plugged into the housings. Loosen the bulbs and pull them off. Replace them.