To change the oil filter on a 1997 Hyundai Excel, first, ensure the engine is cool and then raise the vehicle using jack stands. Place a drain pan underneath the oil filter, then use an oil filter wrench to unscrew the old filter, allowing any residual oil to drain out. Before installing the new filter, apply a bit of new oil to the rubber gasket on the filter, then screw it on by hand until snug. Finally, replace the oil, check for leaks, and dispose of the old filter properly.
The Valvoline Oil Filter is V05.
To change the oil filter on a 1996 Hyundai Excel, first, ensure the engine is cool and the vehicle is on a level surface. Remove the oil drain plug and allow the old oil to drain into a pan. Next, locate the oil filter; use an oil filter wrench to remove it, then apply a little new oil to the rubber gasket of the new filter before installing it. Finally, replace the drain plug, refill the engine with new oil, and start the engine to check for leaks.
The 1997 Hyundai Excel typically requires about 4.5 quarts (approximately 4.3 liters) of engine oil when performing an oil change with a filter replacement. It's always best to check the owner's manual for the specific oil capacity and recommendations for your particular vehicle model.
The 1998 Hyundai Excel typically requires about 3.5 quarts (approximately 3.3 liters) of engine oil when equipped with a 1.5-liter engine, including the oil filter change. Always refer to the owner's manual for the most accurate specifications and recommendations for oil type and capacity.
The oil filter is on the side of the engine closest to the front of the car. there is a hole on the front skid plate to reach the filter through.
5,9 liters
Believe it or not it is in the Owner's Manual.
The engine oil capacitie with oil filter change is 4.5 QTS
i have a 1994 excel and i use 4 quarters of synthetic oil
4.23 Quarts
The oil filter for a Hyundai Getz is on the drivers side of the engine. The filter is midway between the front and back of the engine.
5.49 qts with filter change