Though the brakes themselves aren't that complex, but due to the problems you could have with the system afterwards, you need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
dot 3
You may have to change the sensor, it's a $9.00 part at autozone.
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
ratchet or socket
carefully
* It could be a blown fuse or * the brake light switch on top of the brake pedal under the dash is bad or * the turn signal switch is bad.
Remove the tire and wheel. Remove the brake pad springs and hardware. Remove the brake rotor. Reverse the process to install the new brake and rotor.
Brake light switch on the brake pedal is defective
It should be in the fusebox with the rest of the fuses.
on top of the brake pedal under the dash.
check your break fluid.