There is no plug wires on a J30, you just unbolt the coil pack that's on top of the spark plugs and then change your plugs, after your finnished changeing the plugs you just reinstall all the coil packs on top of the spark plugs, but becarefull you don't break any of your coil packs, they will cost you.
we need help! how do you change spark plugs and wires on a 2001 toyta camery
4 Cyl/SR20DE Engine/---O2 sensor,distributor rotor,spark plugs and wires,oil change,transmission fluid change,air filter,fuel filter.And if wanted to change-fuel pump,fuel injectors,fuel pressure regulator.
Remove the spark plug wires from your 1993 Chevy Astro spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
distributorless ignition system - the coil pack(s) with the towers where your spark plug wires are connected - the other ends of the spark plug wires are connected to the spark plugs ( on the 2.3 L and 4.0 L engines in 1993 )
Three on each side of the motor. Follow the spark wires.
Under the cover where the spark plug wires go into on top of the engine.
Change the spark plugs and wires first. That is often all they need to run right.
1234
Just follow the plug wires to the end.
removed plug wire, remove spark plug, gap new plug to spec. and reinstall. Repeat for every other cylinder. Would recommend replacing plug wires, cap and rotor when replacing spark plugs.
remove one at a time follow it to where it goes and pull it off and do the same with the other one. this is very easy no tools needed
replace spark plugs and wires