The oil drain plug on a 1993 Acura Legend is 14mm x 1.5
The radiator drain plug is on the bottom edge of the 1991 Legend. It looks like a wing nut and is on the drivers side.
The way to replace the thermostat on a 91 Acura Legend Coupe is to drain the radiator and remove the throttle and cable box. Remove the top of the radiator hose and the bolts. The thermostat will be inside.
To prevent clogs in your heat pump condensation drain, regularly clean the drain line with a mixture of vinegar and water, install a drain line trap to catch debris, and schedule annual maintenance checks with a professional HVAC technician.
it on the left side of the tranny pan, behind the front driver side tire
The evaporator drain for a 2004 Acura RL is located on the passenger side of the vehicle, beneath the dashboard. You can access it by looking for a small rubber or plastic drain tube that extends through the firewall. This drain allows condensation from the air conditioning system to exit the vehicle. If you're experiencing water accumulation inside the cabin, it could indicate a blockage in this drain.
To prevent clogs in your HVAC condensation drain system, you can regularly clean and maintain the drain line by flushing it with a mixture of water and vinegar, installing a drain line cleaning device, and ensuring proper insulation and ventilation around the system to prevent mold growth.
The drain tube for the condensation is probably plugged with debris. Condensation is a normal process within the ac system. Locate the drain tube and clean it out, the location varies with each make and model vehicle.
Common causes of water leakage from an AC condensation pan include clogs in the drain line, a damaged condensation pan, or improper installation. To prevent water leakage, regularly clean the drain line, inspect the condensation pan for damage, and ensure proper installation of the AC unit.
That is the drain for the normal condensation from the air conditioner.That is the drain for the normal condensation from the air conditioner.
In a 2006 Acura MDX, the AC drain is typically located on the passenger side of the vehicle, beneath the dashboard. You may find it near the firewall, where the evaporator case is positioned. It's designed to allow condensation from the air conditioning system to drain out of the vehicle. If you're having issues with water buildup, checking this area for blockages can be helpful.
The condensation drain is centered above the transmission, behind the heat shields.The condensation drain is centered above the transmission, behind the heat shields.