when I replace the fuse for the interior lights on my 2004 CVR the alarm sounds, can I simply disconnect the power to the alarm (if I can locate it) to disable it,......
To disable the factory alarm system on a 2002 Honda Accord without a remote, you can use the key to unlock the driver's door, which typically disarms the alarm. If this doesn't work, try starting the car with the key; this may also reset the alarm. If the alarm still activates, disconnecting the negative battery terminal for a few minutes can reset the system. If problems persist, consult the owner's manual or a professional for further assistance.
To disable an alarm on a Honda Civic locate the brain of the system. The brain controls the alarm. Unplug the brain from the wire harness.
Not all Honda Civics come with an alarm but I own a 1997 Honda Civic that came with a remote.
Buy a Honda
You should be able to use your key to unlock the driver's door to deactivate the alarm or to use the remote control. If neither works, there is a button in between the AM/FM and CD button on your Honda stero, and holding it down will deactivate the alarm.
with your remote
A 1993 Honda Civic alarm has an available program mode. To enable program mode place the key in the on position and press lock on the remote control 3. Do this three times in five seconds. Once in program mode the alarm can be reset.
With the remote
Yes, any car alarm equipped with "starter kill" or "starter disable" will make it impossible to start your vehicle until the system is disarmed with your remote or the vehicle key.
The factory alarm can not be disabled. It can be reset by unlocking the doors with a key or remote.
To shut off the alarm on a 2004 Hyundai XG350 without the remote, you can try inserting the key into the driver's side door and turning it to unlock. This should disable the alarm. If that doesn't work, you can also disconnect the car battery for a few minutes and then reconnect it, which will reset the alarm system.
The alarm in a 1993 Honda Civic can be disabled using the program mode. To enable the program mode pull the key in the on position while pressing lock on the remote. Do this three times in five seconds and program mode will become enabled.