To shut off the alarm on a 2004 Hyundai XG350 without the remote, you can try inserting the key into the driver's side door and turning it to unlock. This should disable the alarm. If that doesn't work, you can also disconnect the car battery for a few minutes and then reconnect it, which will reset the alarm system.
I would suspect that the alarm system is not arming. Typically this is caused by a missing hood switch bumper.
no
Yes
under the hood
· XG350 (Hyundai) · XJ6 (Jaguar)
A crankshaft sensor, on a Hyundai XG350, can be installed by simply plugging the new sensor into the slot of the old sensor. The sensor can be located on the back of the engine cover.
To program the keyless remote for a 2002 Hyundai XG350, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position, then back to "Off" five times within ten seconds, ending in the "On" position. You should hear a chime indicating that the vehicle is in programming mode. Press any button on the remote within 30 seconds to program it; you should hear another chime confirming successful programming. Repeat for additional remotes if needed.
nO
Use Hyundai SPIII in transaxle and power steering system.
how do i bleed brakes on a 2003 hyunia xg350
i need to know what fuse is the one for the wipers
castrol import vehicle