To stop running the DRL daytime running lights in the 2005 Toyota Echo the headlight relay needs to be modified. The DRL module on the relay needs to be cut and relay inserted into the harness.
To disable the daytime running lights (DRL) on a 2007 Toyota Matrix, you can locate the DRL fuse in the fuse box under the dashboard or in the engine compartment and remove it. Alternatively, some models allow you to disable DRL through the vehicle's settings, so check your owner's manual for specific instructions. If you're unsure, consider consulting a professional mechanic for assistance.
Typically one cannot disable a drl on the 2003 Honda Accord because it is a required safety feature. To disable the drl you would have to take it to any Honda service center and have them disable the drl for you. They would have to disconnect the required attachments to successfully disable the drl without compromising the rest of the mechanisms.
I found it! Do a search on "How does one disable the DRL daylight running lights option on the 2001 Toyota Sienna?" The 2001 is the same (as far as I know) as the 2003. They changed Toyota Sienna in 2004. http://wiki.answers.com/Q/How_does_one_disable_the_DRL_daylight_running_lights_option_on_the_2001_Toyota_Sienna&updated=1&waNoAnsSet=2 Anyway, look up "How does one disable the DRL daylight running lights option on the 2001 Toyota Sienna?" and that will answer your question. I did it on mine and it works! Here are some website's I found that have the procedures for disabling the DRL on 1999 - 2003 headlights: http://www.pnw4runners.net/fj/tsb/2000_disable_drl.pdf http://www.c7performance.com/techinfo/tsb/TSB_DRL_REMOVE.pdf http://www.yotatech.com/~corey/tech/ducky_drl/ducky.htm http://www.geocities.com/mistertwo@sbcglobal.net/tsb/El011-00/El011-00.htm http://vamp.darkravers.net/cpg/displayimage.php?album=107&pos=6
drl main relay location at left side of the dash panel , you can not disable drl from relay No. 5 , I will tell you how to disable drl Toyota echo . first you pull out toward you the dash panel cover , it will come out easy , you will find at left side of panel two small boxes fixed on a bar , first one is red door lock/ unlock relay , you have to loose from bar to reach the second one which is black , that black one is drl main relay , only you have to take out harrness and no drl any more but in this case your parking brake lights will not go on if you use park brake , another way you can cut the red wire in harness pin 12 and return back harness to relay , your parking brake light will be working only you disable drl , hope you understand ?
take the relay out
I found this web site on DRL, check it out. http://www.lightsout.org/disable.html
To disable the Daytime Running Lights (DRL) on a Kenworth truck, locate the DRL fuse in the fuse box and remove it. Alternatively, some models may allow you to disable the DRL through the vehicle's dashboard settings or by adjusting the headlight switch. Always consult your owner's manual for specific instructions related to your model year. If you're unsure, it's advisable to seek assistance from a qualified technician.
To disable the Daytime Running Lights (DRL) on a 2010 Mitsubishi Outlander, you typically need to locate the fuse box and remove the fuse associated with the DRL system. Alternatively, some models may allow you to disable DRL through the vehicle's settings or by using a diagnostic tool. Always consult the owner's manual for specific instructions related to your model, or consider seeking assistance from a professional mechanic.
push the overide swithch 2 times
To disable the Daytime Running Lights (DRL) on a 2002 Chevy Prizm, you can locate the DRL relay under the dashboard. Remove the relay or disconnect the wiring harness leading to it. Alternatively, you can fuse the DRL circuit by removing the appropriate fuse from the fuse box. Always consult your vehicle's manual for specific instructions and safety precautions.
Simple: Remove fuse #15. It is labeled DRL/FOG. If you have fog lights you will lose those too.