0
Not sure when you wrote this but since there are no answers, I will answer this. The problem is most likely has a broken cable which comes out of the window motor and attaches to the rail the glass sits in or a broken pulley wheel. As the motor winds uo, the cable reels in and raises the window. If the cable breaks or comes out of the pulley wheel, it will let the glass fall. I am in the middle of changing one out right now. Seems to be a pretty easy fix if you can find parts. I think if I did another one, I could do it in about 30 minutes or less now that I know how everything comes apart. Good Luck... Ray
What else can I help you with?
Why Water in spare tire compartment Daewoo Leganza?
If the Daewoo Leganza is equipped with a rear window washer system, the water in the spare tire compartment could be from a leak in the vacuum hose for this. There is also a possibility that a portion of the body near the spare tire compartment is rusted out and taking on water when it rains.
How do you remove the door panel on a 2002 Daewoo Leganza?
you take out the two strews on the side, then the strew in the area of the window button pry off the panel
Where is the power window fuse on a 2002 leganza?
The power window fuse for a 2002 Daewoo Leganza is typically located in the fuse box under the dashboard on the driver's side. To access it, you'll need to remove the cover of the fuse box. Look for a fuse labeled specifically for the power windows; it may be listed in the fuse diagram found on the cover or in the owner's manual. If the fuse is blown, replacing it should restore power to the windows.
How do you repair an automatic driver's side window that has fallen off track on a 1998 Ford Mustang?
Had the same issue on my 1993. You need to take the door panel off to access the nuts and bolts that are used to mount the window to the guide.
How do you fix a jeep window that has fallen down?
Replace defective window regulator
How do you fix your windows in your Daewoo Leganza 2002 CDX two windows don't work they just fall down so I have been taping them up so they stay up I think they might have fallen off the track?
Same thing happend to me, Its a regulator arm or control arm. forgot the name. it happens on all cars and the price is around 200 300 bucks !! It is the back door, so i got annoyed with the tape so I just shot some glue in where the window goes up in the door and all is good !!
Why do the locks move when you push the power window buttons on your daewoo nubria?
It is just another safety mechanism. They did that as another precaution in the Daewoo nubria, nothing to be alarmed about.
How do you fix your automatic windows on your 98 Malibu?
The 1998 Chevrolet Malibu automatic window fuse is located in the fuse box. The fuse box is in the engine compartment. Replace the automatic window fuse.
How do you manually wind up a window on a electric window for a daewoo nubira?
To manually wind up the window on a Daewoo Nubira with electric windows, you'll need to remove the door panel to access the window regulator. Once you have access, locate the manual override on the window regulator, which may involve using a wrench or a screwdriver to engage the mechanism. Carefully turn the regulator to raise the window. Ensure that you reassemble the door panel securely afterward.
Why would the automatic driver window release stop working on a Saturn?
what is a window release?
How do you insert window lever for Daewoo cielo?
To insert the window lever for a Daewoo Cielo, first, ensure that the window mechanism is properly aligned. Locate the lever's connection point on the window regulator and slide the lever onto the spline or shaft until it fits snugly. You may need to secure it using a retaining clip or screw, depending on the specific design. Finally, test the lever to ensure it operates the window smoothly.
How do you fix a window in a daewoo cielo that has been disconnected from the winder?
To fix a window in a Daewoo Cielo that has been disconnected from the winder, first, remove the door panel to access the window mechanism. Reconnect the window regulator to the winder by aligning the teeth or clips properly. Ensure all connections are secure, and then test the window operation before reassembling the door panel. If the mechanism is damaged, consider replacing it for smooth operation.
