To turn off the VGRS (Variable Gear Ratio Steering) light on a Lexus, first ensure that the vehicle's power is on, but the engine is off. Check for any issues with the steering system or related sensors, as the light indicates a problem. If no issues are found, you can try disconnecting and reconnecting the vehicle's battery to reset the system. If the light remains on, it's advisable to consult a professional mechanic or visit a Lexus dealership for further diagnosis.
To reset the VGRS (Variable Gear Ratio Steering) system in a vehicle, first, turn off the engine and disconnect the battery for a few minutes to clear any stored error codes. Reconnect the battery and start the engine. If the VGRS warning light remains on, consult the vehicle's manual or a professional mechanic for further diagnostics, as it may indicate a persistent issue needing attention.
probably have to have a Lexus dealer turn it off
shut off abs light on 1998 es300
Vehicle Stability Control "off" light indicating that it is turned off.
Airbag. Off light
The license plate light on a Lexus may turn on and off if there is a loose wire. Try wiggling the wires around and see if the light goes on and off. If it's not a loose wire then the light bulb may have come loose and needs to be tightened.
I would unplug the battery. This will reset your clock, etc., but it should turn the light off.
A Lexus ES 350 tire pressure light will reset on its own. Tire pressure lights will turn off when the tire is at the proper pressure.
that's the traction control if its on that mean your traction is off
The light should turn off after the tire(s) is inflated
To turn off the maintenance light on a 2006 Lexus GX 470, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, turn off the ignition and then restart the vehicle; the maintenance light should be reset and turned off.
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.