0
How do you get the crankshaft pulley bolt off on a 2002 Toyota 4 runner I have tried an impact wrench and a long breaker bar it won't budge?
I know that the torque on the 1991 4 Runner V6 is around 180lbs of torque and the threads have adhesive applied to them. HOWEVER, in my case my problem is just the opposite. My truck lost the bolt and trashed my radiator and I now have to order a new one. - You might find out by calling a dealership if the bolt is LH or RH... This might make a difference... NOTE: Make sure you put set torque properly when you replace it and put adhesive on the threads... If you don't it spins out and slams into your radiator at high speed...
What else can I help you with?
How do you remove the Topaz 94 Crankshaft Pulley?
try an impact gun, or rest a breaker bar against the body or something and use the starter
What is the pulley that is before the harmonic balancer on a 93 Toyota 4runner?
Crankshaft Pulley !
Do you turn counterclockwise to loosen the crankshaft pulley bolt on a 94 acura legend?
Yes, to loosen the crankshaft pulley bolt on a 1994 Acura Legend, you turn it counterclockwise. This follows the standard righty-tighty, lefty-loosey rule for bolts. However, be aware that the crankshaft pulley bolt can be very tight, so using a breaker bar or impact wrench may be necessary to loosen it.
How do you remove the crankshaft pulley from a 2005 Chrysler PT Cruiser?
You use an impact wrench or breaker bar and spanner to remove the bolt.. a special insert is placed were the bolt was. Then a three jaw puller is used to pull the pulley off.
How do you remove the crankshaft pulley from a 1998 ford contour 2.0 4 cylinder?
Use a chain wrench around the pulley and a breaker bar on the bolt.
Where is the oil pump on a 99 Toyota Camry?
You have to remove the timing belt and the crankshaft pulley if you want to get access to the oil pump. The oil pump itself is just behind the crankshaft pulley.
How do you remove Honda Prelude crankshaft pulley?
To remove the crankshaft pulley from a Honda Prelude, first ensure the engine is off and cool. Use a breaker bar and the appropriate socket to loosen the crankshaft pulley bolt, which may require holding the flywheel or using a crankshaft pulley holder tool. Once the bolt is removed, carefully pull the pulley off the crankshaft, ensuring you avoid damaging any surrounding components. If the pulley is stuck, gently tap it with a rubber mallet or use a puller tool for assistance.
Where is crankshaft position sensor on 97 buick lesabre 3.8?
The Crankshaft Position Sensor is behind the crankshaft pulley (harmonic balancer). You will need a ½-inch drive breaker bar and appropriate socket.
How do you take out the crankshaft pulley on a opel corsa utility 1.4 i.s?
To remove the crankshaft pulley on an Opel Corsa Utility 1.4, first, ensure the vehicle is securely lifted and supported. Remove the drive belts and any accessories attached to the pulley. Use a suitable socket and breaker bar to loosen the crankshaft pulley bolt, which may require counter-holding the crankshaft with a tool to prevent it from rotating. Once the bolt is removed, you can pull the pulley off the crankshaft, possibly using a puller if it is stubborn.
How do you remove the crankshaft pulley from a VAUXHALL corsa?
To remove the crankshaft pulley from a Vauxhall Corsa, start by disconnecting the battery and removing any components obstructing access to the pulley, such as the serpentine belt. Use a suitable socket to loosen the crankshaft pulley bolt, which may require a breaker bar for added leverage. Once the bolt is removed, you can use a puller tool to gently detach the pulley from the crankshaft. Be sure to follow any specific guidelines for your vehicle model to avoid damage.
Where is the Harmonic Balancer on 1996 Toyota Corolla?
On any motor, the harmonic balancer is on the front of the crankshaft. It is what the pulley is bolted to.
How do you take crankshaft pulley off a 1991 geo storm?
To remove the crankshaft pulley from a 1991 Geo Storm, first disconnect the negative battery cable and remove any belts connected to the pulley. Then, use a suitable socket and ratchet to remove the crankshaft pulley bolt, which may require a breaker bar for extra leverage. You may need to use a puller tool to gently extract the pulley from the crankshaft if it’s stuck. Always consult a repair manual for specific torque specifications and procedures.
