there should be a alen screw through the top and bottom of the caliper that bolts the caliper to the spinle mount bracket remove those two alen screws and the caliper will lift off of the disk and then the brake pads can be removed from the caliper.
GTO wasn't made in 1991.
To install front brake drums on a 1965 Pontiac GTO, first, lift the vehicle and remove the front wheels. Then, remove the brake drum by taking off the retaining hardware, such as the wheel cylinder or any clips. Inspect and clean the brake components, then place the new drum onto the hub, ensuring it fits snugly over the brake shoes. Finally, reattach any retaining hardware, reinstall the wheels, and lower the vehicle.
Yes. Disc and Drum brakes mount differently, each uses a different spindle. Brake lines, hoses and master cylinders are also different.
ecu is in the centre console behind the stereo
The front grille inserts and the tail light assemblies were different, the engine went from a 389ci to a 400 ci., tri-power carburetion was not available for the 1967 model year and front disc brakes was an option for 1967.
No, the front fenders of the 1966 GTO are not the same as those of the 1967 GTO. While they share a similar overall design, the 1967 model features a slightly different shape and incorporates changes in styling, such as a different headlight configuration and grille design. Therefore, they are not interchangeable without modifications.
27, 297 ( in thousands), accordin gto 1991 census./
No.
no it wont fit. The body lines are different. A 66 will fit a 67
Chiltons manual at the library.
its in front of the radiator, usually theres 2
It is on the right side in front of the air box...