Open the glass hatch - the screws holding the plastic lens housing to the pillar will be revealed. Remove the screws and carefully pull the lens housing away from the body pillar exposing the wiring to the sockets. Twist out the appropriate socket (1/2 turn) and remove the bulb. Replace in reverse order.
How do i remove the tail light on a 2005 Honda odyssey to rpleced the light bulb.
How do you replace the rear brake light bulb on a 2001 Honda civic?"
light out on the seat heater switch on passenger side. High low indicator is ok. How do you replace bulb?
To replace the dome light in your 2005 Toyota, you will need a flat screwdriver to remove the screws and pry the dome light cover from the light. You can then access the light to change the bulb or replace the entire bulb and cover.
how do you replace light out radio and clock on 2005 bonnievillie pontiac gxp
get a new light bulb ,take the cover off the light bulb that's broken and replace it.
You have to replace it by crawling under the bumper. It may be handy to have a flashlight with you. Twist and/or pull the bulb out to replace.
With great difficulty.
Look at it and you will figure it out.
To replace the license plate light bulb on a 2006 Honda Pilot, first, locate the light assembly above the license plate. Use a flathead screwdriver or a similar tool to gently pry open the light cover. Once the cover is removed, twist the old bulb counterclockwise to remove it and replace it with a new bulb, ensuring it is securely in place. Finally, reattach the light cover and check that the light is functioning properly.
how do you replace a taillight on a Honda 2002 Civic?
Try this: http://wiki.answers.com/Q/How_do_change_the_headlight_bulb_on_2005_Honda_CRV