To retrieve trouble codes for a 1989 Mazda MX-6, you can use the diagnostic connector located under the dashboard. First, turn the ignition key to the "ON" position without starting the engine. Then, use a jumper wire to connect terminals E1 and TE1 on the diagnostic connector. The check engine light will blink in a series of codes that correspond to specific trouble codes; count the blinks to interpret the codes according to the vehicle’s service manual.
all ecu codes are posted at mx6.com and probetalk.com
it is the lifters, so you will need to change the head
Call a locksmith. In my area they charge about $80 for this service.
mx6 got no moonroof - only a sunroof and YES its interchangeable
I think it has the same engine as the 1990's, so it has 145hp.
1,2,3,4,5,6
If you have the standard 1995 Mazda MX6 then it came OE with P195/65R14... I hope this has helped. COO of TireTyre.com
stock wheels on the first gen mx6 is +44 for the 15x6 wheels.
117mph
That one over there parked by the Honda.
none you need a Mazda 4 cylder from a probe mx6 626 there is a few Japanese imports motors that will fit too look up Mazda fe or Mazda f2 motor on wikipieda none you need a Mazda 4 cylder from a probe mx6 626 there is a few Japanese imports motors that will fit too look up Mazda fe or Mazda f2 motor on wikipieda
Mazda produced the MX6 automobile for the first time in 1987. They then released the second generation model in 1991 and this was in production until 1997.